Floor Level and Inner Roll Stop Adjustments
Inner Roll Stop Occupied Sensor Adjustment
1.The optimum setting for the inner roll stop occupied sensor adjustment nut is to have just enough pressure to fold and unfold the inner roll stop without trigger- ing the inner roll stop occupied sensor. This provides the most weight sensitive setting while allowing the unoccupied inner roll stop to function correctly.
2.If the weight of the empty inner roll stop is triggering the sensor while it is fold- ing, tighten the sensor nut 1/8 turn and cycle the lift several times to verify cor- rect operation. See Photo J.
3.If the lift is not reacting to weight on the inner roll stop soon enough, loosen the pressure adjusting nut 1/8 turn and cycle the lift several times to verify cor- rect operation.
4.If the inner roll stop occupied alarm continues to go off even when the inner roll stop is in the vertical position, turn the sensor activation bolt clockwise until alarm is not activated. See Photo K.
Adjustment Nut
J |
K |
Sensor Activation Bolt
Page 10