Floor Level and Inner Roll Stop Adjustments
Inner Roll Stop Adjustment
3.Use an Allen wrench to prevent the cam locking screw from turning and loosen the 3/8" ser-
UDWHGÁDQJHQXWVHFXULQJWKH lifting arm cam. See Photos D and E. Do not remove the screw or nut.
4.Raise the platform 1" above
ÁRRUOHYHOusing the manual operation system.
5.Turn the cam adjustment screw counterclockwise until the inner
UROOVWRSUHVWVRQWKHÁRRU
Do not continue to turn the adjustment screw once the inner roll stop is contacting the YHKLFOHÁRRU
6.9HULI\WKHUHLVQRJDSEHWZHHQ the inner roll stop and the roll VWRSFDWFK6HH3KRWR)7XUQ the adjustment screw clockwise to bring the roll stop catch back in contact with the inner roll stop. 'RQRWUHPRYHWKHJDS
E\DGMXVWLQJWKHOLQNDJHURG
7.While holding the cam locking screw, tighten the 3/8" serrated
ÁDQJHQXWsecurely.
3/8"
Serrated
)ODQJH1XW
Cam Locking Screw | ' |
Cam Adjustment
Screw
E |
Inner
Roll Stop Roll Stop
Catch
Linkage Rod
F |
Page 8