Multiquip manual MVC-90L Plate Compactor Rules for Safe Operation

Page 9

MVC-90L PLATE COMPACTOR — RULES FOR SAFE OPERATION

WARNING - ReadThis Manual

Failure to follow instructions in this manual may lead to Serious Injury or even Death. This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the Mikasa MVC-90L Plate Compactor:

Safety:

DO NOT operate or service this equipment before reading this entire manual.

This equipment should not be operated by persons under 18 years of age.

NEVER operate this equipment without

proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job.

NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.

NEVER operate the saw under the influence or drugs or alcohol.

NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties.

Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

ALWAYS check all the bolts on the light tower for tightness.

NEVER disconnect any "emergency or safety devices". These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection of any of these devices will void all warranties.

NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing engine or generator.

High Temperatures – Allow the engine to cool before adding fuel or performing service and maintenance functions. Contact with hot components can cause serious burns.

The engine of this reversible plate compactor requires an adequate free flow of cooling air. NEVER operate the reversible plate compactor in any enclosed or narrow area where free flow of the air is

restricted. If the air flow is restricted it will cause serious damage to the reversible plate compactor or engine and may cause injury to people and property. Remember the vibration roller's engine gives off DEADLY gases.

ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the engine

and allow it to cool.DO NOT smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

NEVER operate the reversible plate compactor in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death.

Topping-off to filler port is dangerous, as it tends to spill fuel.

ALWAYS store the reversible plate compactor in a clean, dry location out of the reach of children.

NEVER run engine without air cleaner. Severe engine damage may occur.

NEVER leave the reversible plate compactor unattended, turn off engine.

CAUTION must always be observed while servicing this reversible plate compactor. Rotating parts can cause injury if contacted.

DO NOT leave reversible plate compactor with engine running.

MVC-90L PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #1 (11/01/05) — PAGE 9

Image 9
Contents Model MVC-90L Proposition 65WARNING Table of Contents Order via Fax Dealers Only Best Deal! Order via Internet Dealers OnlyLbs kg MVC-90L Plate Compactor SpecificationsMVC-90L Plate Compactor Dimensions MVC-90L Plate Compactor Safety Message Alert Symbols Always wear approved respiratory protection when requiredDeveloped to provide complete This reversible plate compactor Never operate this equipment without MVC-90L Plate Compactor Rules for Safe OperationNever lift the machine while the engine is running Loading and Unloading CraneMachine Safety Decals MVC-90L Plate Compactor Operation and Safety DecalsVibratory Plate Definition of Plate CompactorWater Tank Frequency/SpeedCounter weights Vibration Case Encloses the eccentric, gearsSplash plate Fuel Tank Holds unleaded gasoline. For additional Cannister to gain access to filter elementSmoothly Flow of fuelBefore Starting MVC-90L Plate Compactor InspectionEngine Oil Check Fuel CheckPlace the engine ON/OFF switch in the on position MVC-90L Plate Compactor START-UP ProcedureStarting the Engine Place the engine fuel valve lever to the Open positionPlacethefuelshut-offleverFigure17 intheOFFposition Normal ShutdownUsing the Compactor Sprinkler System Operating the Compactor on High Moisture Content SoilOperation Always move the throttle leverMVC-90L Plate Compactor Maintenance Inspection and Maintenance ServiceTablesDaily Service Mixture and re-install it back into the air cleaner Engine Oil ReplacementVibrator Oil Check Tip the compactor to drain the oilReplacing theV-belt Belt CheckChecking the Clutch Replacing the ClutchPump Storage MVC-90LPLATECOMPACTOR-PREPARATIONFORLONG-TERMSTORAGEEngine Troubleshooting MVC-90L Plate Compactor -TROUBLESHOOTING EngineAir cleaner not clean? MVC-90L Plate Compactor -TROUBLESHOOTING Plate Compactor Part NO. Column NO. ColumnQTY. Column Remarks ColumnMVC-90L MVC-90L Plate Compactor Suggested Spare PartsMVC-90L Plate Compactor Name Plate and Decals Part Name MVC-90L Plate Compactor Body Assy Part Name QTY MVC-90L Plate Compactor Body Assy Cock PT1/4 MVC-90L Plate Compactor -VIBRATOR Assy Part Name QTY Remarks MVC-90L Plate Compactor Clutch ASSY. Oldtype MVC-90L Plate Compactor Clutch ASSY. Oldtype MVC-90L Plate Compactor Clutch ASSY. Newtype Clutch Shaft D19.05/20W Robin EH172YD4230 Engine Crankcase Group Assy Oversize Robin EH172YD4230 Engine Crankshaft Assy NUT Robin EH172YD4230 Engine Intake and Exhaust Group Assy Release Lever Robin EH172YD4230 Engine Governor Assy Governor Lever Robin EH172YD4230 Engine Cooling and Starting Assy 210-49 Robin EH172YD4230 Engine Cooling and Starting AssyRobin EH172YD4230 Engine Fuel Group Assy 50-13 Robin EH172YD4230 Engine Carburetor Assy 210-12 210-11210-13 210-14Electric Device Group ASSY. Recoil Start Flywheel CP Robin EH172YD4230 Engine OIL Sensor Assy OIL Sensor CP Terms and Conditions of Sale Parts Page Your Local Dealer is Heres HOW to GET Help

MVC-90L specifications

The Multiquip MVC-90L is a highly versatile and efficient concrete vibrator designed to enhance the performance of contractors in various construction projects. With its powerful Honda engine and robust construction, the MVC-90L stands out as a reliable tool for consolidating concrete, ensuring high-quality finishes for slabs, walls, and other structures.

One of the primary features of the MVC-90L is its Honda GX160 engine, which offers a consistent power output of 5.5 horsepower. This engine is known for its durability and fuel efficiency, providing the necessary power to operate the vibrator effectively. The MVC-90L also includes a centrifugal clutch, providing smooth engagement and disengagement, which contributes to its user-friendly operation.

The design of the MVC-90L prioritizes comfort and ease of use. It is equipped with ergonomic handles and a lightweight frame, making it easy for operators to maneuver on job sites. Additionally, its compact size allows for easy transportation and storage, making it a practical choice for contractors who need to move equipment frequently.

The MVC-90L features a 15-foot flexible shaft coupled with a vibratory head, which ensures an extensive reach for a variety of applications. This flexibility allows users to cover larger areas without needing to reposition the equipment frequently. The vibrator head produces a high frequency of vibration, ensuring efficient concrete consolidation, resulting in a denser and stronger final product.

With a robust construction, the MVC-90L is designed to withstand the rigors of heavy job site use. The materials used in its construction are resistant to wear and tear, ensuring longevity and reduced maintenance costs. This reliability makes it a preferred choice among professionals who demand performance from their equipment.

Multiquip also emphasizes safety features in the MVC-90L design. The vibrating head is engineered to minimize operator fatigue, while the centrifugal clutch helps reduce the risk of accidental starts. The overall design incorporates safety measures to protect both the user and the equipment.

In summary, the Multiquip MVC-90L is a powerful and user-friendly concrete vibrator that offers reliable performance for various construction applications. With its Honda engine, ergonomic design, and efficient operational features, it ensures professional-quality results while promoting safety and ease of use on the job site. Contractors seeking a durable and effective concrete consolidation solution will find the MVC-90L an invaluable addition to their equipment lineup.