MVC-90L Plate Compactor Inspection, Before Starting

Multiquip MVC-90L Plate Compactor Inspection, Before Starting, Engine Oil Check, Fuel Check

MVC-90L PLATE COMPACTOR — INSPECTION

Before Starting:

CAUTION - General Safety Precautions

NEVER operate the compactor in a confined area or enclosed area structure that does not provide ample free flow of air.

ALWAYS wear approved eye and hearing protection before operating the compactor.

1.Read safety instructions at the beginning of manual.

2.Remove dirt and dust, particularly in the engine cooling air inlet, carburetor and air cleaner.

3.Check the air filter for dirt and dust.

If air filter is dirty, clean or replace the air filter with a new one as required.

4.Check carburetor for external dirt and dust. Clean with dry compressed air.

5.Check fastening nuts and bolts for tightness.

Engine Oil Check

1.To check the engine oil level, place the plate compactor on secure level ground with the engine stopped.

2.Remove the filler cap/dipstick from the engine oil filler hole (Figure 5) and wipe it clean.

Figure 5. Engine Oil Dipstick

3.Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick.

4.If the oil level is low (Figure 6), fill to the edge of the oil filler hole with the recommended oil type (Table 4).Maximum oil capacity is 400 cc.

Figure 6. Engine Oil Dipstick

		The Oil Alert system will
	NOTE	automatically stop the engine
	NOTE	before the engine falls below safe
		before the engine falls below safe
		limits. Always be sure to check the
		engine oil level prior to starting
		the engine.

Table 4. Oil Type

Season	Temperature	Oil Type

Summer	25°C or Higher	SAE 10W-30

Spring/Fall	25°C~10°C	SAE 10W-30/20

Winter	0°C or Lower	SAE 10W-10

Fuel Check:

1.Remove the gasoline cap located on top of fuel tank.

2.Visually inspect to see if the fuel level is low. If fuel is low, replenish with unleaded fuel.

3.Whenrefueling,besuretouseastrainerforfiltration.DONOT top-off fuel.Wipe up any spilled fuel immediately!

WARNING - Explosive Fuel

Gasoline is extremely flammable, and its vapors can cause an explosion if ignited. DO NOT start the engine near spilled fuel or combustible fluids. DO NOT smoke while refueling.DO NOT attempt to refuel the pump if the engine is hot! or running.

MVC-90L PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #1 (11/01/05) — PAGE 15

MVC-90L specifications

The Multiquip MVC-90L is a highly versatile and efficient concrete vibrator designed to enhance the performance of contractors in various construction projects. With its powerful Honda engine and robust construction, the MVC-90L stands out as a reliable tool for consolidating concrete, ensuring high-quality finishes for slabs, walls, and other structures.

One of the primary features of the MVC-90L is its Honda GX160 engine, which offers a consistent power output of 5.5 horsepower. This engine is known for its durability and fuel efficiency, providing the necessary power to operate the vibrator effectively. The MVC-90L also includes a centrifugal clutch, providing smooth engagement and disengagement, which contributes to its user-friendly operation.

The design of the MVC-90L prioritizes comfort and ease of use. It is equipped with ergonomic handles and a lightweight frame, making it easy for operators to maneuver on job sites. Additionally, its compact size allows for easy transportation and storage, making it a practical choice for contractors who need to move equipment frequently.

The MVC-90L features a 15-foot flexible shaft coupled with a vibratory head, which ensures an extensive reach for a variety of applications. This flexibility allows users to cover larger areas without needing to reposition the equipment frequently. The vibrator head produces a high frequency of vibration, ensuring efficient concrete consolidation, resulting in a denser and stronger final product.

With a robust construction, the MVC-90L is designed to withstand the rigors of heavy job site use. The materials used in its construction are resistant to wear and tear, ensuring longevity and reduced maintenance costs. This reliability makes it a preferred choice among professionals who demand performance from their equipment.

Multiquip also emphasizes safety features in the MVC-90L design. The vibrating head is engineered to minimize operator fatigue, while the centrifugal clutch helps reduce the risk of accidental starts. The overall design incorporates safety measures to protect both the user and the equipment.

In summary, the Multiquip MVC-90L is a powerful and user-friendly concrete vibrator that offers reliable performance for various construction applications. With its Honda engine, ergonomic design, and efficient operational features, it ensures professional-quality results while promoting safety and ease of use on the job site. Contractors seeking a durable and effective concrete consolidation solution will find the MVC-90L an invaluable addition to their equipment lineup.