MVC-90L PLATE COMPACTOR — MAINTENANCE
Maintenance
CAUTION - General Maintenance Safety
Inspection and other services should always be carried out on hard and level ground with the engine shutdown.
Inspection and Maintenance ServiceTables.
To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7.
Daily Service
zCheck for leakage of fuel or oil.
zRemove soil and clean the bottom of compaction plate.
zCheck engine oil.
zCheck for loose screws including tightness. See Table 5 below (tightening torque ), for retightening:
These inspection intervals are for
NOTE operation under normal conditions. Adjust your inspection intervals based on the number hours plate compactor is in use, and particular working conditions.
TABLE 5. TIGHTENING TORQUE
(in. kg/cm) Diameter
Material | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 18mm | 20mm | |
|
|
|
|
|
|
|
|
|
|
4T | 70 | 150 |
| 300 | 500 | 750 | 1,100 | 1,400 | 2,000 |
|
|
|
|
|
|
|
|
|
|
100 | 250 |
| 500 | 800 | 1,300 | 2,000 | 2,700 | 3,800 | |
|
|
|
|
|
|
|
|
|
|
11T | 150 | 400 |
| 800 | 1,200 | 2,000 | 2,900 | 4,200 | 5,600 |
|
|
|
|
|
|
|
|
|
|
* |
| 100 |
|
| 300 ~ 350 | 650 ~ 700 | |||
| (6mm) |
|
| (8mm) |
| (10mm) | |||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
* (In case
Material and quality of material is marked on each bolt, and screw.
Note: Threads in use with this machine are all right handed
TABLE 6. ENGINE INSPECTION
(For details, see seperate Engine Manual)
Check Item | Hours of Operation | ||
|
|
| |
Fuel or Oil Leakage | Every 8 | Hours (Daily) | |
|
|
| |
Fastening Threads | Every 8 | Hours (Daily) | |
Tightness | |||
|
| ||
|
|
| |
Check/Replenish | Every 8 | Hours (Daily) | |
Engine Oil | |||
|
| ||
|
| ||
Replace Engine Oil | First 20 hours, | ||
then every 100 hours | |||
| |||
|
|
| |
Check/Clean the | Every 50 hours | ||
Air Cleaner | |||
|
| ||
|
|
|
TABLE 7. |
| ||
|
|
|
|
ITEM | HOURS OF | REMARKS |
|
OPERATION |
| ||
|
|
| |
|
|
|
|
Damaged Parts | Every 8 hours | Check Before |
|
Daily Operation |
| ||
|
|
| |
|
|
|
|
Loose or Lost Screws | Every 8 hours | Check Before |
|
Daily Operation |
| ||
|
|
| |
|
|
|
|
Function of Controlling | Every 8 hours | Check Before |
|
System Part | Daily Operation |
| |
|
| ||
|
|
|
|
Vibrator Oil Check | Every 100 hours |
|
|
|
| See Page 21 |
|
Vibrator Oil | Every 300 hours |
| |
|
| ||
Replacement |
|
| |
|
|
| |
|
|
|
|
Every 200 hours | See Page 22 |
| |
|
|
|
|
NOTE | Fuel piping and connections should | ||
| be replaced every 2 years. |