Leica ICC50 HD manual Preparation for Use, Tools used ϘϘ Allen key, Microscope’s viewing tube

Page 16

Preparation for Use

Tools used ϘϘ Allen key

Do not insert anything except the SD memory card into the card slot –

danger of short circuit and electric shock!

The Leica ICC50 HD camera module fits between the microscope stand and the

microscope’s viewing tube.

Preparation for Use

1.If the microscope’s viewing tube is in place, remove it.

Attach the Leica ICC50 HD to the microscope stand:

2.Slightly unscrew the set screw (located on top of the stand) with the Allen key tool provided with the microscope.

3.Insert the dovetail (see the underside of the Leica ICC50 HD) into the stand support.

4.Tighten the set screw firmly without forcing it.

Leica ICC50 HD

Manual

16

 

 

 

Image 16
Contents Leica ICC50 HD Manual Contents General Instructions Safety concept Important information Symbols usedProvide clarity Safety regulations DescriptionDesignated use Non-intended useLegal regulations DisposalTransport EC Declaration of Conformity Leica ICC50 HD Real Full HD display IntroductionLeica Application Suite HD Mode For use without a computer PowerBasics High DefinitionPC Mode For use with Leica Imaging Software Leica ICC50 HD Overview Black Multipurpose ButtonSecond page through illumination SD card Slot Accepts SD card for stand- alone image captureFront Unpacking Need ariseGet Ready Preparation for Use Tools used ϘϘ Allen keyMicroscope’s viewing tube Preparation for UsePreparation for Use Get Set Connection and Operation for Imaging using a Computer Installing and ConnectingWith the ICC50 HD Your computerLimitations in PC Mode Remote controlComputer using Leica Application Suite Aspect ratioConnecting the Hdmi monitor Using an Additional Hdmi Monitor in PC ModeHdmi interface Only switches to PC mode when the Leica software is started Camera into the power-jack in the backPower outlet Capturing Images without a computerCapturing an image How to handle SD memory cards Using High Definition Video without a computer Setting a new white balance for the ICC50 HD Tion is available when you reset the cameraSetting a new white balance Factory settingsCamera Menu Optional remote control Remote control does not work if the camera is in PC modeViewing images and movies with the optional remote control Software and re-power up the camera Point the remote control towards the cameraCalling up the Camera Menu Opening and closing the camera menuColor Automatic White Balance Enabling automatic white balanceAdjusting the white balance manually recommended Color Manual White BalanceManual exposure Automatic exposureLive resolution of the live image Captured resolution of the captured imageMovie resolution of videos Quality of the image captureSetup Camera Camera Settings Select to flip imageSetup User User-defined Settings SET Illum -1 to 3 save illumination modesDefines how long the menu is displayed on the screen Select the language of the menuChanging the illumination mode Predefined Illumination ScenariosWide spectrum of possible situations AppearsLeica ICC50 HD Manual Ready! Set! Go Care and Cleaning General Care and CleaningElectrical Considerations Specifications Leica ICC50 HD camera module Order numbersElectronic interfaces Mechanical and optical interfacesOther