Capturing Images without a computer (cont.)
2.Insert the SD memory card into the slot on the side of the Leica ICC50 HD until the card clicks into place.
Capturing an image
•It is critical to properly set the micro- scope eyepieces’ diopters to ensure
that the images on the SD memory card are in focus when the image is in focus through the microscope’s eyepieces. Refer to the micro- scope’s User Manual for proper diopter setting. You can also use the HDMI output and an HD display (not provided) as a focusing aid. See next section for proper HDMI setup.
ϘϘ You will hear a beep to acknowledge the button was pressed.
ϘϘ The camera’s LED flashes green while the image is being captured.
ϘϘ You will hear another beep when the Leica ICC50 HD has completed capturing the image.
The image is now saved on the SD card.
The camera’s LED will turn green. The Leica ICC50 HD is now ready to capture images onto the SD memory card.
1.To capture an image onto the SD memory card, lightly press the red image capture button, located on the side of the Leica ICC50 HD camera.
Leica ICC50 HD | Manual | 23 |
|
|
|