Leica ICC50 HD manual Care and Cleaning, General, Electrical Considerations

Page 41

Care and Cleaning

General

ϘϘ Keeping all optical components clean is important for maintaining good optical performance.

ϘϘ Always cover the microscope with the Leica ICC50 HD camera with the plastic dust cover (provided with the microscope), when the instrument is not in use. Be sure power to the camera is off when the dust cover is in place.

ϘϘ If any optical surface becomes badly coated with dust or dirt, it should be cleaned by blowing the surface with a syringe or brush- ing it off with a camel hair brush before attempting to wipe the surface clean.

ϘϘ Optical surfaces should be cleaned with a lint-free cloth, lens tissue or a cotton swab moistened with methanol or commercially available glass cleaner. Do not use alcohol.

ϘϘ It is very important to avoid the excessive use of solvent. The lint-free cloth, lens tissue or cotton swab should be moistened with solvent, but not be wet enough for the solvent to seep around the lens.

Electrical Considerations

Risk of electric shock. Removing the covers of the Leica ICC50 HD Camera or the Stand-alone Kit exposes hazardous voltages,

which if contacted, could cause injury or death. Please contact an authorized Leica Microsys- tems dealer for technical service.

Leica ICC50 HD	Manual	41

Image 41

Contents Leica ICC50 HD Manual Contents General Instructions Safety concept Provide clarity Symbols usedImportant information Description Safety regulationsDesignated use Non-intended useTransport EC Declaration of Conformity DisposalLegal regulations Leica ICC50 HD Leica Application Suite IntroductionReal Full HD display Power HD Mode For use without a computerBasics High DefinitionPC Mode For use with Leica Imaging Software Black Multipurpose Button Leica ICC50 HD OverviewSecond page through illumination SD card Slot Accepts SD card for stand- alone image captureFront Need arise UnpackingGet Ready Tools used ϘϘ Allen key Preparation for UseMicroscope’s viewing tube Preparation for UsePreparation for Use Get Set Installing and Connecting Connection and Operation for Imaging using a ComputerWith the ICC50 HD Your computerRemote control Limitations in PC ModeComputer using Leica Application Suite Aspect ratioHdmi interface Using an Additional Hdmi Monitor in PC ModeConnecting the Hdmi monitor Camera into the power-jack in the back Only switches to PC mode when the Leica software is startedPower outlet Capturing Images without a computerCapturing an image How to handle SD memory cards Using High Definition Video without a computer Tion is available when you reset the camera Setting a new white balance for the ICC50 HDSetting a new white balance Factory settingsCamera Menu Remote control does not work if the camera is in PC mode Optional remote controlViewing images and movies with the optional remote control Point the remote control towards the camera Software and re-power up the cameraCalling up the Camera Menu Opening and closing the camera menuEnabling automatic white balance Color Automatic White BalanceColor Manual White Balance Adjusting the white balance manually recommendedAutomatic exposure Manual exposureCaptured resolution of the captured image Live resolution of the live imageMovie resolution of videos Quality of the image captureSelect to flip image Setup Camera Camera SettingsSET Illum -1 to 3 save illumination modes Setup User User-defined SettingsDefines how long the menu is displayed on the screen Select the language of the menuPredefined Illumination Scenarios Changing the illumination modeWide spectrum of possible situations AppearsLeica ICC50 HD Manual Ready! Set! Go Care and Cleaning Electrical Considerations Care and CleaningGeneral Specifications Order numbers Leica ICC50 HD camera moduleOther Mechanical and optical interfacesElectronic interfaces