Leica ICC50 HD manual Mechanical and optical interfaces, Electronic interfaces, Other

Page 44

Leica ICC50 HD camera module (cont.)

Mechanical and optical interfaces

ϘϘ Fits between viewing tube and stand via standard Leica Microsystems dovetail

ϘϘ Center offset of the top dovetail to the bottom < 0.4 mm

ϘϘ Light distribution Optical 50% / Camera 50%

ϘϘ Internal video magnification 0.5×

ϘϘ Sensor Centered to optical axis ± 0.1 mm

ϘϘ Hoizontally / Vertically aligned ± 1 degree

Electronic interfaces

ϘϘ Computer USB 2.0, mini-USB plug

ϘϘ High Definition connector Mini-HDMI, HD-ready, and full HD

ϘϘ LED with 2 colors Ready (green), image capture (red)

ϘϘ Integrated slot SD (Secure Digital) card

ϘϘ 1-8GB, WIFI, WORM supported

ϘϘ Black buton for changing illumination modes (press 1 second), and switching from HD to PC mode (press for 3 seconds)

ϘϘ Red button for capture with SD card (press 1 second), camera reset (press 10 seconds), set new white balance (press 5 seconds)

Other

ϘϘ Power supply USB 2.0 ϘϘ Power requirement 4 W ϘϘ External power supply

ϘϘ Operating temperature range +5 °C to 50 °C ϘϘ Relative humidity 10 to 90%

ϘϘ CE Declaration of Conformity Available

ϘϘ Tested standards EMI/RFI: EN55011-B EN50082-1

ϘϘ EMC: 61000-3-2 61000-3-3

Leica ICC50 HD	Manual	44

Image 44

Contents Leica ICC50 HD Manual Contents General Instructions Safety concept Provide clarity Symbols usedImportant information Safety regulations DescriptionDesignated use Non-intended useTransport EC Declaration of Conformity DisposalLegal regulations Leica ICC50 HD Leica Application Suite IntroductionReal Full HD display HD Mode For use without a computer PowerBasics High DefinitionPC Mode For use with Leica Imaging Software Leica ICC50 HD Overview Black Multipurpose ButtonSecond page through illumination SD card Slot Accepts SD card for stand- alone image captureFront Unpacking Need ariseGet Ready Preparation for Use Tools used ϘϘ Allen keyMicroscope’s viewing tube Preparation for UsePreparation for Use Get Set Connection and Operation for Imaging using a Computer Installing and ConnectingWith the ICC50 HD Your computerLimitations in PC Mode Remote controlComputer using Leica Application Suite Aspect ratioHdmi interface Using an Additional Hdmi Monitor in PC ModeConnecting the Hdmi monitor Only switches to PC mode when the Leica software is started Camera into the power-jack in the backPower outlet Capturing Images without a computerCapturing an image How to handle SD memory cards Using High Definition Video without a computer Setting a new white balance for the ICC50 HD Tion is available when you reset the cameraSetting a new white balance Factory settingsCamera Menu Optional remote control Remote control does not work if the camera is in PC modeViewing images and movies with the optional remote control Software and re-power up the camera Point the remote control towards the cameraCalling up the Camera Menu Opening and closing the camera menuColor Automatic White Balance Enabling automatic white balanceAdjusting the white balance manually recommended Color Manual White BalanceManual exposure Automatic exposureLive resolution of the live image Captured resolution of the captured imageMovie resolution of videos Quality of the image captureSetup Camera Camera Settings Select to flip imageSetup User User-defined Settings SET Illum -1 to 3 save illumination modesDefines how long the menu is displayed on the screen Select the language of the menuChanging the illumination mode Predefined Illumination ScenariosWide spectrum of possible situations AppearsLeica ICC50 HD Manual Ready! Set! Go Care and Cleaning Electrical Considerations Care and CleaningGeneral Specifications Leica ICC50 HD camera module Order numbersOther Mechanical and optical interfacesElectronic interfaces