Leica MZ16 F user manual Assembly of stereomicroscope with stand

3.2Assembly of stereomicroscope with stand

Do not yet connect the peripherals to the power supply!

Focusing drive ➔ stand base

￿Fasten the manual or motorized focusing drive (4.2) to the column according to User Manual M2-105-0 (manual) or M2-267-1 (motorized) on the base (4.1).

Tool: Allen key.

￿For motorized focus and FluoCombi III™, fasten the focusing stop to the stand column under the focusing drive using a clamping screw.

Microscope carrier ➔ focusing drive

￿Fasten the microscope carrier (4.3) to the Leica MZ16 F according to User Manual M2-105-0 on the focusing drive (4.2). Tool: Allen key.

Or, if available:

￿Fasten the FluoCombi III™ to the focusing drive (4.2) as described in User Manual M2-166-2. Tool: Allen key.

Optics carrier ➔ microscope carrier

The Leica MZ16 F optics carrier and the FLUOIII® filter system make up a single unit, which is factory-adjusted. They may not be taken apart.

When using the motorized focus, be certain

to read the corresponding User Manual M2 -267-1, in particular the safety instructions.

￿Insert the Leica MZ16 F optics carrier (4.4) according to User Manual M2-105-0 into the microscope carrier (4.3) or into the FluoCombi III™ and fasten it using a clamping screw.

6			8
5
4		2
3				1	Base
	9			2	Focusing drive
7				3	Microscope carrier
				4	Optics carrier
1				5	Video/photo tube
				6	Eyepiece
				7	Objective
				8	Lamp housing 106 z
				9	Supply unit

Fig. 4 Right side of the Leica MZ16 F

14 Leica MZ16 F – Assembly