3.3 Additional components
Fasten the other components and other individ- ual accessories according to User Manual
–Insert the binocular tube (2.5) or the video/ phototube into the dovetail ring on the FLUOIII® filter system and fasten it using a clamping screw.
–Insert the eyepieces (4.6) in the tubes and fasten them using the clamping screws.
–If necessary, place soft eyecups for prevent- ing eye infections over the
–Screw the objective (4.7) into the bottom of the optics carrier (4.4) counterclockwise.
3.3.1 Video/photo tube
We recommend using the trinocular video/photo- tube (4.5) or the
Insert the video/photo tube (4.5) into the ring connector on the FLUOIII® filter system accord- ing to User Manual
Fasten a binocular tube to the
3.4 Light source
The Leica 106 z lamp housing is the light source for the Leica MZ16 FA and is used with 100W or 50W mercury lamps, corresponding supply units and
Please read
–the separate User Manual
–the user manual and safety instructions for the ebq 100 supply unit
–the user manual and safety instructions pro- vided by the lamp manufacturer, and, in partic- ular, the section on how to proceed if a lamp breaks and releases mercury.
Do not switch on the supply unit until you have read and familiarized yourself with the functions of the Leica MZ16 F, provided in the "Operation" chapter.
After it is switched on, the burner must be adjusted immediately.
3.4.1 Lamp housing 106 z
Fasten the 106 z lamp housing (4.8) to the adapter part as described in User Manual
3.4.2 Supply units
The supply unit for 50W mercury lamps is described in User Manual
The 100W mercury lamps are powered by the ebq 100 (4.9) supply unit.
Please read the separate instruction manual provided by the manufacturer.
Leica MZ16 F – Assembly | 15 |