Graco 3A059OG important safety instructions Important Safety Instructions, 262807 24M398

Page 1

Instructions - Parts

Mix Manifold

3A0590G

EN

For mixing two component reactive materials with plural-component sprayers. For professional use only.

Approved for use in explosive atmospheres.

Part No. 262807

Mix Manifold, Single Flush

Part No. 24M398

Quickset Mix Manifold, Dual Flush with Carriage, Gauges, and Static Mixers

7250 psi (50 MPa, 500 bar) Maximum Working Pressure 5000 psi (34.5 MPa, 345 bar) Maximum Flush Inlet Pressure 160 °F (71 °C) Maximum Fluid Temperature

Important Safety Instructions

Read all warnings and instructions in this manual. Save these instructions.

262807

24M398

ti19004a

ti18954a

II 2 G cT5

Image 1

Contents 262807 24M398 Important Safety InstructionsRelated Manuals ContentsFire and Explosion Hazard Skin Injection Hazard Pressurized Aluminum Parts Hazard Important Two-Component Material Information B Component Designations Changing MaterialsMachine Left Machine Right Market Equipment Designations Quickset Manifold Key Component IdentificationSide of Mix Manifold OverviewMixed Material Fluid Inlets InstallationFluid Outlet Solvent InletGrounding Flush Before Using EquipmentRatio Check Operation Pressure Relief ProcedureTrigger Lock Relieve a and B Fluid PressureFlushing Dispensing and Spraying Adjust Restriction at the Mix Manifold Volume Balancing the Mix ManifoldVolume Ratio of a to B Hose Hose Selection Mix Ratio Hose Selection for Feeding a Remote Mix ManifoldPsi Bar Cps at 1 liter/minReference Formula Clean Static Mixers MaintenanceClean B Side Screen Clean Mix Manifold OutletProblem Cause Solution TroubleshootingCartridge Assemblies RepairAssemble Restrictor Remove RestrictorRepair 3A0590G Mix Manifold PartsBall Part No. Description Qty24M398 Quickset Mix Manifold Part No. Description Repair KitsAccessory Ports AccessoriesMix Manifolds Metric Technical DataWetted parts Graco Information Graco Standard Warranty