Graco 3A059OG Operation, Pressure Relief Procedure, Trigger Lock, Relieve a and B Fluid Pressure

Page 12

Operation

Operation

Pressure Relief Procedure

Follow pressure relief procedure when you stop spraying or dispensing; and before cleaning, checking, servicing, or transporting equipment.

Relieve A and B Fluid Pressure

1. Engage the trigger lock.

ti1949a

2.Turn off the sprayer.

3.Close the bleed-type master air valve.

4.Open the dual shutoff handle (E).

5.Shut off fluid heaters, if used on your sprayer.

6.Shut off feed pumps, if used.

7.Disengage the trigger lock.

ti1950a

8.Hold a metal part of the gun firmly to a grounded metal pail. Trigger the gun to relieve pressure.

ti1953a

9. Engage the trigger lock.

ti1949a

10.Open all fluid drain valves in the system, having a waste container ready to catch drainage. Leave drain valves open until you are ready to spray again.

11.If you suspect the spray tip or hose is clogged or that pressure has not been fully relieved after follow- ing the steps above, VERY SLOWLY loosen tip guard retaining nut or hose end coupling to relieve pressure gradually, then loosen completely. Clear hose or tip obstruction.

Trigger Lock

Always engage the trigger lock when you stop spraying to prevent the gun from being triggered accidentally by hand or if dropped or bumped.

12

3A0590G

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Important Safety Instructions 262807 24M398Contents Related ManualsFire and Explosion Hazard Skin Injection Hazard Pressurized Aluminum Parts Hazard Important Two-Component Material Information Changing Materials B Component DesignationsMachine Left Machine Right Market Equipment Designations Component Identification Quickset Manifold KeyOverview Side of Mix ManifoldMixed Material Installation Fluid InletsFluid Outlet Solvent InletFlush Before Using Equipment GroundingRatio Check Pressure Relief Procedure OperationTrigger Lock Relieve a and B Fluid PressureFlushing Dispensing and Spraying Volume Balancing the Mix Manifold Adjust Restriction at the Mix ManifoldVolume Ratio of a to B Hose Hose Selection Mix Ratio Hose Selection for Feeding a Remote Mix ManifoldCps at 1 liter/min Psi BarReference Formula Maintenance Clean Static MixersClean B Side Screen Clean Mix Manifold OutletTroubleshooting Problem Cause SolutionRepair Cartridge AssembliesRemove Restrictor Assemble RestrictorRepair 3A0590G Parts Mix ManifoldPart No. Description Qty Ball24M398 Quickset Mix Manifold Repair Kits Part No. DescriptionAccessories Accessory PortsTechnical Data Mix Manifolds MetricWetted parts Graco Standard Warranty Graco Information

3A059OG specifications

The Graco 3A059OG is a standout product in the realm of paint sprayers, showcasing cutting-edge technology tailored for both professionals and DIY enthusiasts. This airless paint sprayer effectively streamlines the painting process, providing an efficient and high-quality finish on a variety of surfaces.

One of the primary features of the Graco 3A059OG is its robust performance. It is equipped with a powerful motor capable of delivering an impressive paint flow rate, enabling users to tackle large projects with ease. With the ability to spray unthinned paint directly from the container, it saves significant preparation time, making it ideal for busy contractors and homeowners alike.

Another remarkable characteristic of the Graco 3A059OG is its adjustable pressure control. This feature allows the user to modify the spray pressure according to the specific requirements of the project or the viscosity of the paint being used. As a result, it ensures a perfect spray pattern and minimizes overspray, allowing for a clean and efficient application.

Additionally, the Graco 3A059OG integrates advanced FlexLiner technology, which enables users to work with various coatings while reducing cleanup time. The FlexLiner bag allows for quick paint changes and minimizes wasted paint, making it an eco-friendly choice. This innovative design enhances overall efficiency and maximizes productivity on site.

Safety features are also a highlight of the Graco 3A059OG. It includes an integrated filtration system that effectively removes debris and contaminants from the paint, ensuring a seamless application without clogging. Furthermore, the user-friendly controls and design enhance safety during operation, making it accessible for both novice and experienced users.

In terms of portability, the Graco 3A059OG is designed with mobility in mind. Its lightweight construction and ergonomic handle facilitate easy transportation, making it convenient for job sites or moving it around the house. The compact design further enables users to store it without consuming too much space.

Overall, the Graco 3A059OG sets a benchmark in the paint sprayer market through its impressive features, including high performance, adjustable pressure control, and innovative FlexLiner technology. Coupled with safety measures and portability, it stands out as an excellent choice for a wide range of painting applications, ensuring a professional-grade finish every time.
Top Page Image Contents