Accessories
Accessories
10,000 psi Fluid Pressure Gauge (2.5 in)
114434 - 1/4 npt(m) back mount pressure gauge can be used in ports as gun pressure gauge.
551387 - 1/4 npt bottom mount version.
High Pressure Hoses and Accessory Fittings
See brochure 339361 for parts and accessories.
262522, Remote Mix Manifold Carriage
The carriage holds and protects the mix manifold assembly. Use two screws (28) to mount the mix mani- fold to the carriage.
15E592, 7250 psi Static Mixer Housing
3/8 npt(m) holds 1/2 in. 12 element plastic sticks.
511352, Mixer
Stainless 3/8 npt(m) pipe with 12 element stainless welded stick; 7250 psi (50 MPa, 500 bar).
Accessory Ports
P1 and P2:
These 1/4 npt ports are located after “A” and “B” shutoff handle.
Can be used for an inlet pressure gauge. These are before the fluid check valves and hardener restrictor.
P3 and P5:
Can be used for a pressure gauge to measure outlet pressure or check ratio with the 24F375 kit. These ports are downstream of the check valve.
The P3 port is used as the second flush inlet on the quickset model of the mix manifold. It flushes across the resin check ball, but not through it.
P4:
Can be used for a pressure gauge to measure hardener pressure before the restrictor, but after the check valve.
248927, Plastic Mix Elements
25 pack of 1/2 in. x 12 element plastic sticks.
B-side screen
40 mesh strainer for low viscosity fluids only.
Ref. |
|
|
|
No. | Part No. Description | Qty. | |
17 | 185416 | STARINER, 40 mesh | 1 |
18 | 121410 | PACKING, screen retainer; PTFE | 1 |
15T630, Screen Installation Tool
Use to reinstall
24F375, Ratio Check Kit
Use to check ratio at mix manifold. See manual 3A0421 for instructions.
P1 
P3 
P5
FIG. 4: Accessory Ports
P2
P4
r_258987_3a0590_9a
26 | 3A0590G |