Graco 3A059OG important safety instructions Fire and Explosion Hazard

Page 3

Warnings

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manual, refer back to these Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout the body of this manual where applicable.

WARNING

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

• Use equipment only in well ventilated area.

• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).

•Keep work area free of debris, including solvent, rags and gasoline.

•Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes are present.

•Ground all equipment in the work area. See Grounding instructions.

•Use only grounded hoses.

•Hold gun firmly to side of grounded pail when triggering into pail.

•If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem.

•Keep a working fire extinguisher in the work area.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

•Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS from distributor or retailer.

•Do not leave the work area while equipment is energized or under pressure. Turn off all equipment and follow the Pressure Relief Procedure when equipment is not in use.

•Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manufacturer’s replacement parts only.

•Do not alter or modify equipment.

•Use equipment only for its intended purpose. Call your distributor for information.

•Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•Do not kink or over bend hoses or use hoses to pull equipment.

•Keep children and animals away from work area.

•Comply with all applicable safety regulations.

3A0590G

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 262807 24M398 Important Safety InstructionsRelated Manuals ContentsFire and Explosion Hazard Skin Injection Hazard Pressurized Aluminum Parts Hazard Important Two-Component Material Information Changing Materials B Component DesignationsMachine Left Machine Right Market Equipment Designations Quickset Manifold Key Component IdentificationOverview Side of Mix ManifoldMixed Material Solvent Inlet InstallationFluid Inlets Fluid OutletFlush Before Using Equipment GroundingRatio Check Relieve a and B Fluid Pressure Pressure Relief ProcedureOperation Trigger LockFlushing Dispensing and Spraying Hose Selection for Feeding a Remote Mix Manifold Volume Balancing the Mix ManifoldAdjust Restriction at the Mix Manifold Volume Ratio of a to B Hose Hose Selection Mix RatioCps at 1 liter/min Psi BarReference Formula Clean Mix Manifold Outlet MaintenanceClean Static Mixers Clean B Side ScreenProblem Cause Solution TroubleshootingCartridge Assemblies RepairAssemble Restrictor Remove RestrictorRepair 3A0590G Mix Manifold PartsBall Part No. Description Qty24M398 Quickset Mix Manifold Part No. Description Repair KitsAccessory Ports AccessoriesTechnical Data Mix Manifolds MetricWetted parts Graco Information Graco Standard Warranty

3A059OG specifications

The Graco 3A059OG is a standout product in the realm of paint sprayers, showcasing cutting-edge technology tailored for both professionals and DIY enthusiasts. This airless paint sprayer effectively streamlines the painting process, providing an efficient and high-quality finish on a variety of surfaces.

One of the primary features of the Graco 3A059OG is its robust performance. It is equipped with a powerful motor capable of delivering an impressive paint flow rate, enabling users to tackle large projects with ease. With the ability to spray unthinned paint directly from the container, it saves significant preparation time, making it ideal for busy contractors and homeowners alike.

Another remarkable characteristic of the Graco 3A059OG is its adjustable pressure control. This feature allows the user to modify the spray pressure according to the specific requirements of the project or the viscosity of the paint being used. As a result, it ensures a perfect spray pattern and minimizes overspray, allowing for a clean and efficient application.

Additionally, the Graco 3A059OG integrates advanced FlexLiner technology, which enables users to work with various coatings while reducing cleanup time. The FlexLiner bag allows for quick paint changes and minimizes wasted paint, making it an eco-friendly choice. This innovative design enhances overall efficiency and maximizes productivity on site.

Safety features are also a highlight of the Graco 3A059OG. It includes an integrated filtration system that effectively removes debris and contaminants from the paint, ensuring a seamless application without clogging. Furthermore, the user-friendly controls and design enhance safety during operation, making it accessible for both novice and experienced users.

In terms of portability, the Graco 3A059OG is designed with mobility in mind. Its lightweight construction and ergonomic handle facilitate easy transportation, making it convenient for job sites or moving it around the house. The compact design further enables users to store it without consuming too much space.

Overall, the Graco 3A059OG sets a benchmark in the paint sprayer market through its impressive features, including high performance, adjustable pressure control, and innovative FlexLiner technology. Coupled with safety measures and portability, it stands out as an excellent choice for a wide range of painting applications, ensuring a professional-grade finish every time.
Top Page Image Contents