Sharp XE-A213 Prior to Programming, Procedure for programming, Guidance messages

Part3 FOR THE MANAGER

PRIOR TO PROGRAMMING

Procedure for programming

1.	Check to see whether a paper roll is present in the machine. If there is not enough
		OPX/Z	REG
	paper on a roll, replace it with a new one (refer to "Replacing the Paper Roll" on		MGR
	page 89 for the replacement).		X1/Z1
2.			X2/Z2
	Put the manager key in the mode switch and turn it to the PGM position.
3.	Program necessary items into the cash register.	PGM

Every time you program an item, the cash register will print the setting. Please refer to print samples in each section.

4.If necessary, issue programming reports for your reference.

• On the key operation example shown in the programming details, numbers such as “22052007” indicates the parameter which must be entered using the corresponding numeric keys.

• Asterisks in the tables shown in the programming details indicate default settings.

Guidance messages

Depending on programming items, the register shows guidance messages on the operator display to indicate a programming item you are in, or guidance to enter data, as shown in the examples below.

Your register allows you to program all necessary data in one procedure with the guidance messages for department programming (page 17), PLU (Price Look-Up) and subdepartment programming (page 22), programming for the -, %, V, r, o, X, Y, cand bkeys (pages 52-60). For their guidance messages, please refer to each section.

Example 1: For key ntry type programming

Key operation example

Press•Guidanceofthemessagesubjectediskeydisplayed(In.caseofparameterentry)@

s

Toterminate A

Operator display

PAYMENT KEY PROG008 displGuidnceTo(dependingrepeatayingmessageuntilonyouprogramming)pressiskept theAkey.

0.00

49