Sharp XE-A213 Department Programming, To delete a tax rate, use the following sequence

Part1 QUICK START GUIDE Part2 Part3

• The lowest taxable amount is valid only when you select add on tax system. If you select VAT (Value added system), it is ignored.

•If you make an incorrect entry before pressing the third @key in programming a tax rate, cancel it with the lkey.

•You do not need to enter the trailing zeros of the tax rate (after the decimal point), but you do need to enter the decimal for fractions.

•If you select VAT system, the sign which you program is ignored.

To delete a tax rate, use the following sequence:

s 9 @ Tax number (1 to 4) @vA

6

Department Programming

Merchandise can be classified into a maximum of 99 departments. Items sold using the department keys can later be printed on a report shown as the quantities sold and sales amounts classified by department. The data is useful for making purchasing decisions and other store operations.

Default setting for the VAT/tax statuses and signs are listed below.

Dept. code:	VAT/tax status:	Sign:
Dept. 1-10	VAT 1	(+)
Dept. 11-20	VAT 2	(+)
Dept. 21	VAT 1	(-)
Dept. 22-99	VAT 1	(+)

• To keep current setting on each programming, press the skey when the corresponding guidance message is firstly displayed.

•When pressing the Akey in the middle of procedure, the programming will terminate and the data you entered before the press of Ais saved.

•When pressing the lkey twice in the middle of procedure, the programming will terminate and the data you entered before pressing the lkey twice is NOT saved.

•When pressing the PLU, -, %, V, r, o, X, Y, cor bkey in the middle of procedure except while entering texts or prices, the programming will move to the pressed key

programming.

17