Sharp XE-A213 Function parameters for a, Press the Akey to terminate the Xkey Programming

5.Entry digit limit programming (Press s to skip. / Press A to terminate.)

(1) Enter entry digit limit using numeric key.	7
The entry digit limit can be set up to 8.
Default setting is 8.
The entry digit limit is in effect for REG mode
operation but can be overridden in the MGR mode.
The entry digit limit is represented by the number of
allowable digits for the maximum entry or total
amount. When "0" is set, the operation of the
corresponding key is prohibited.
(2) Press the skey to register the setting.	s
In the case of programming for the Xand c
keys, the display shows "CH2 PROGRAMMING"
and "CR2 PROGRAMMING" respectively. Go to
step 2 to program the Yand bkeys.
In the case of programming for the r, o, Yand
bkeys, the display shows "ENTER[TL/NS]KEY".
Go to step 6.

7

CH2 PROGRAMMING

ENTER[00]KEY

6. Terminate programming

(1) Press the Akey to terminate the Xkey	A
programming.
	Print

Text

0.00

From left, ABC

Item:		Selection:	Print:
A	Footer print	No*	0
		Yes	1
B	Amount tendered entry	Non compulsory (for Xand Y)*	0
		Inhibit (for cand b)*	0
		Compulsory	1
C	Entry digit limit		0-8 (default:8)

Function parameters for A

To program 0 for all items

*1ABC @s

To program for another key

A

	*1:Item:			Selection:	Entry:
		A	Footer printing*	Allow	1
				Disallow*	0
		B	Amount tendered entry*	Compulsory	1
60				Non-compulsory*	0
		C	Entry digit limit		0-8 (default:8)