Sharp XE-A213 instruction manual When not using the take-up spool using as receipt paper

5.When not using the take-up spool (using as receipt paper):

•Cut off the excess paper using the edge of the inner cover, and replace the printer cover. Press the Fkey to make sure the paper end comes out of the printer cover and clean paper appears.

If the paper end does not come out, open the printer cover, and pass the paper end between the paper cutter and the paper guide of the printer cover, and replace the cover.

When using the take-up spool (using as journal paper):

•Insert the end of the paper into the slit in the spool. (Press the F key to feed more paper if required.)

•Wind the paper two or three turns around the spool shaft.

•Set the spool on the bearing, and press the Fkey to take up excess slack in the paper.

•Replace the printer cover.

When using a paper roll as journal paper, you must change the printing style. Refer to “Print format” in “Various Function Selection Programming 1” section (Job code 6) for changing the printing style.

12