Sharp XE-A213 Logo message print format, Thermal printer density, EJ memory type

Part1 Part2 Part3 FOR THE MANAGER

Logo message print format

You can select the number of lines for your logo message, and the position to print it on receipt. For details of the logo message type, please refer to “Logo messages” on page 25.

				To set 0
	s	11	@			s		A
					*A
*A: Logo message type
0: Header 3-line message without graphic logo
3: Header 6-line message
5: Header 3-line message and footer 3-line message (default)
	Key operation example						Print

s11 @

3 s A

Thermal printer density

	To set 0
s 50 @	*Printer density	s A
	(00-99)

*50 (100%) is the default setting. To make the print darker, set a larger number, and to make the print lighter, set a smaller number.

Key operation example Print

s50 @

70 s A

EJ memory type

When this procedure is executed, EJ data is cleared, and PLU data (programming data and sales data) are reset to the default after all data is cleared even if the same memory type is selected.

	s	90	@	*A	A
*A: 0 for EJ 8000 lines and PLU 1200 codes
1 for EJ 9000 lines and PLU 210 codes (default)
	Key operation example				Print

s90 @

0 A

73