Sharp XE-A213 instruction manual Specify the department code, 300, Key operation Operator display

1.Specify the department code.

(1)For dept.1 through 6, press the department key. Or enter dept. code using numeric key, and then press the dkey.

Immediately after displaying the current text data and the corresponding dept. key code you entered, guidance message for the next step will be displayed.

Key operation Operator display

6 DEPT.06 06

ENTER[00]KEY

2.Text programming (Press s to skip. / Press A to terminate.)

(1) Press :key to enter text programming.	:
Immediately after displaying guidance message, the
current text data will be displayed.
(2) Enter an item name.	BOOK
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 14 for entering the item name.
When you start entering a character, the current
text data will be overwritten by new data.
Pressing the Pand @key moves the cursor to
the right and left respectively.
(3) Press the skey to register the item name.	s
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.

3.Unit price programming (Press s to skip. / Press A to terminate.)

(1)	Enter a unit price using numeric keys.	300
	A maximum of 6 digits can be set.
	Default setting is 0.
(2)	Press the skey to register the unit price.	s
	Immediately after displaying guidance message for
	the next step, the current setting for the next step
	will be displayed.

ENTER TEXT

DEPT.06

BOOK

PRICE

0.00

300

DEPT ENTRY TYPE

OPEN & PRESET

4.Entry type programming (Press s to skip. / Press A to terminate.)

	(1) Press :key 3 times to display "PRESET".	: : :
	Each time :key is pressed, the display shows
	"INHIBITED", "OPEN", "PRESET" and "OPEN &
	PRESET" in this order.
	Default setting is "OPEN".
	When the unit price is changed from the default
	setting ("0") in step 3, "OPEN & PRESET" will be
	displayed first.
	However, when the default setting is not changed,
18	"OPEN" will be displayed first.

PRESET