Sharp XE-A213 instruction manual Text programming Press sto skip. / Press a to terminate, 500

Part1 QUICK START GUIDE

2.Text programming (Press sto skip. / Press A to terminate.)

(1) Press :key to enter text programming.	:
Immediately after displaying guidance message, the
current text data will be displayed.
(2) Enter an item name.	MELON
A maximum of 16 characters can be entered.
Please refer to “Guidance for text programming” on
page 14 for entering the item name.
When you start entering a character, the current
text data will be overwritten by new data.
Pressing the Pand @key moves the cursor to
the right and left respectively.
(3) Press the skey to register the item name.	s
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.

3.Unit price programming (Press sto skip. / Press A to terminate.)

(1)	Enter a unit price using numeric keys.	500
	A maximum of 6 digits can be set.
	For a subdepartment, set the limit amount of unit
	price entry.
	Default setting is 0.
(2)	Press the skey to register the unit price.	s
	Guidance message for the next step will be displayed.

4.Associated dept. programming (Press sto skip. / Press A to terminate.)

(1) Enter an associated dept. code using numeric key.	1
For dept. 1 through 6, you may press the
corresponding department key.
Default setting is dept. 1.
For deleting PLU, enter 0 instead of an associated
dept. code.
(2) Press the skey to register the associated dept.	s
code.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.

Part2 Part3

ENTER TEXT

PLU.0071

MELON_

PRICE

0.00

500

ENTER DEPT#

1

ENTER PLU TYPE

PLU

23