Sharp XE-A213 Entering character codes with numeric keys on the keyboard, Display

Example 2: Job code type programming (programming starting from the press of s.)

Key operation example

JobParameterRegistration•Guidancecodeentryentrymessageofparameterisdisplayed. s 1@50

	Operator display
MACHINE NO.	afterGuidanceTo(dependingrepeatwmessagejoboncodeprogramming)isentrychanged.

50

s

ENTER[TL/NS]KEY

Toterminate A

0.00

Entering character codes with numeric keys on the keyboard

For entering numerals, letters or symbols, enter a character code using numeric keys and press the numeric key :. For the character codes, please refer to the alphanumeric character code table on the next page. By doing this, you can program characters other than those on the key tops. For entering numerals, letters or symbols using character keys, refer to "Using character keys" on page 14.

•Double-size characters can be made by entering the character code 253 or pressing the Wkey. “W” is displayed when double-size characters entry is selected as shown in the operator display example below.

•All three digits of the character code MUST be entered (even if it starts with z ro).

Key operation example				Operatorare		display
065:		Charactersentered			displayedhere.
		_		W
					Charactercode
	065
:
			=A	_Characters:IndicatingW	doublesizecharacterof"A"

To program the word “SHARP” in double-size characters

253 : 083 : 072 : 065 : 082 : 080 :

S H A R P

50