Part1 Part2 Part3 FOR THE MANAGER

2.Text programming (Press s to skip)

(1)Press :key to enter text programming. Immediately after displaying guidance message, the

current text data will be displayed.

(2)Enter the text.

A maximum of 16 characters can be entered. Please refer to "Guidance for text programming" on page 14 for entering the text.

When you start entering a character, the current text data will be overwritten by new data. Pressing the Pand @key moves the cursor to the right and left respectively.

:

EX

ENTER TEXT

EXCH1

EX

(3) Press the skey to register the text.

s

Immediately after displaying guidance message for

 

the next step, the current setting for the next step

 

will be displayed.

 

3.Rate programming (Press s to skip. / Press A to terminate.)

(1)

Enter the rate using numeric keys, using a decimal

0.939938

 

point when setting fractional rates.

 

 

 

The rate can be set from 0.000000 to 999.999999.

 

 

Default setting is 0.000000.

 

(2)

Press the skey to register the rate.

s

 

Immediately after displaying guidance message for

 

 

the next step, the current setting for the next step

 

 

will be displayed.

 

ENTER EX RATE

0.000000

0.939938

OPEN RATE ENTRY

OPEN ENABLE

4.Open rate entry programming (Press s to skip. / Press A to terminate.)

(1)Go to (2) when the open rate entry does not need to be changed from "OPEN ENABLE". Otherwise,

press :key to display "OPEN DISABLE".

Each time :key is pressed, the display shows "OPEN DISABLE" and "OPEN ENABLE" alternatively.

Default setting is "ENABLE".

(2) Press the skey to register the setting.

s

Immediately after displaying guidance message for

 

the next step, the current setting for the next step

 

will be displayed.

 

PRESET RATE

PRESET ENABLE

5.Preset rate entry programming (Press s to skip. / Press A to terminate.)

(1)Go to (2) when the preset rate entry does not need to be changed from "PRESET ENABLE". Otherwise,

press :key to display "PRESEST DISABLE".

Each time :key is pressed, the display shows "PRESET DISABLE" and "PRESET ENABLE"

alternatively.

Default setting is "ENABLE".

57

Page 59
Image 59
Sharp XE-A213 instruction manual Text programming Press s to skip, 939938