Graco 333282B important safety instructions Intrinsic Safety

Page 10

Warnings

WARNING

INTRINSIC SAFETY

Intrinsically safe equipment that is installed improperly or connected to non-intrinsically safe equipment will create a hazardous condition and can cause fire, explosion, or electric shock. Follow local regulations and the following safety requirements.

•Be sure your installation complies with national, state, and local codes for the installation of electrical apparatus in a Class I, Group D, Division 1 (North America) or Class I, Zones 1 and 2 (Europe) Hazardous Location, including all of the local safety fire codes (for example, NFPA 33, NEC 500 and 516, OSHA 1910.107, etc.).

•To help prevent fire and explosion:

•Do not install equipment approved only for a non-hazardous location in a hazardous location. See model ID label for the intrinsic safety rating of your model.

•Do not substitute system components as this may impair intrinsic safety.

•Equipment that comes in contact with the intrinsically safe terminals must be rated for Intrinsic Safety. This includes DC voltage meters, ohmmeters, cables, and connections. Remove the unit from the hazardous area when troubleshooting.

SKIN INJECTION HAZARD

High-pressure fluid from dispensing device, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

• Do not point dispensing device at anyone or at any part of the body.

• Do not put your hand over the fluid outlet.

•Do not stop or deflect leaks with your hand, body, glove, or rag.

•Follow the Pressure Relief Procedure when you stop dispensing and before cleaning,

checking, or servicing equipment.

•Tighten all fluid connections before operating the equipment.

•Check hoses and couplings daily. Replace worn or damaged parts immediately.

MOVING PARTS HAZARD

Moving parts can pinch, cut or amputate fingers and other body parts.

• Keep clear of moving parts.

•Do not operate equipment with protective guards or covers removed.

•Pressurized equipment can start without warning. Before checking, moving, or servicing

equipment, follow the Pressure Relief Procedure and disconnect all power sources.

TOXIC FLUID OR FUMES

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

•Read MSDSs to know the specific hazards of the fluids you are using.

•Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

• Always wear chemically impermeable gloves when spraying, dispensing, or cleaning equipment.

10

333282B

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Important Safety Instructions Color Change and Remote Mix Manifold KitsContents Manual No Description Related ManualsManual No Models Non-Intrinsically Safe ModulesControl Module Pressure Valves 0359 Intrinsically Safe ModulesKit Identification Label Number of Catalyst + Solvent ValvesModels continue on next 333282B Models Fire and Explosion Hazard Intrinsic Safety Personal Protective Equipment Moisture Sensitivity of Isocyanates Important Isocyanate ISO InformationIsocyanate Conditions Changing MaterialsColor Change Control Modules, Colors, and Catalysts Setup the ModulesSetup Non-IS Control Modules ModuleInlet Manifold Non-IS Control Module Switch SettingsOutlet Manifold Inlet Manifold Outlet Manifold Solenoid Valve Setup is Control Modules Is Control Module Switch SettingsIs Control Module Solenoid Valve Is Control Module Valve SolenoidAir Supply InstallationMounting the Control Modules GroundingNon-Hazardous Location Connect the Color Change Control ModulesInstall the Valve Manifolds Install the Valve ManifoldsInstallation Hazardous Location Connect Remote Color Change Control ModuleInstall the Remote Valve Manifolds Non-Hazardous Area Install the Remote Mix ManifoldConnect the Valve Air Lines Hazardous AreaInstallation Connect the Fluid Lines Valve Manifold Stack SchematicConnect Non-Circulating Fluid Lines KEY Connect Circulating Fluid Lines Valve Manifold Connections Circulating SystemKEY Install an Expansion Kit Install an Expansion Kit Low Pressure Valve Manifold Shown Cause Solution TroubleshootingColor Change Solenoid Valves Replace the Color Change Board Fuse, Color Change Board Troubleshooting Electrical Schematics Power ModuleEfcm Cable J8 J9 J15 J16 J14 J10 J15 J16 Electrical Schematic, Sheet 3, Hazardous Location Optional Cables and Modules Repair Replace a Color ValveReplace the Color Change Board Fuse Replace a SolenoidFuse Description Replace the Color Change Board Control Module Repair Non-IS Module ShownParts Non-IS Color Change KitsLow Pressure Non-IS Kits Part Description QtyHigh Pressure Non-Circulating Color Change Kits High Pressure Non-IS KitsKit No Kit Description High Pressure Circulating Color Change KitsParts Is Color Change Kits Description QtyLow Pressure is Kits All available kits PartsHigh Pressure is Kits Non-Circulating Valve Manifold Kits Kit No Series Valve Manifold KitsLow Pressure Valve Manifold Kits Circulating Valve Manifold Kits Kit NoValve Manifold Kit Parts Kit No Parts Low Pressure Circulating Valve Manifold Kit Part Quantities High Pressure Valve Manifold Kits Circulating Valve Manifold Kits Kit No SeriesValve Manifold Kit Parts 24T581 Parts High Pressure Circulating Valve Manifold Kit Part Quantities Parts Color Change Control Module Kits Non-IS Color Change Control ModulesConnector 310 321 322 Fitting 305 324 Kit No Position Solenoid Plug Tie Strap Ferrule ConnectorNon-IS Control Module Part Quantities Is Color Change Control Modules 16M00 Is Control Module Part QuantitiesParts Low Pressure Expansion Kits High Pressure Expansion Kits Expansion KitsNon-IS Expansion Kits High Pressure Acid-Compatible Expansion KitsIs Expansion Kits Low Pressure Expansion KitsDimensions Manifold Mounting Bracket, Non-IS 11.44 312 Mm diameter Dimensions Dimensions Technical Data Color Change Kits MetricGraco Standard Warranty Graco Information

333282B specifications

The Graco 333282B is a high-performance airless paint sprayer, designed specifically for both DIY enthusiasts and professional painters who require efficiency and precision. This versatile sprayer is suitable for a variety of projects, including home renovations, commercial applications, and creative crafts.

One of the standout features of the Graco 333282B is its robust TrueLife airless technology, which allows for a smooth and even finish without the hassles associated with traditional paintbrushes or rollers. This technology minimizes overspray while ensuring consistent paint delivery, making it an optimal choice for achieving professional-quality results.

In terms of power, the Graco 333282B incorporates a reliable electric motor that provides enough strength to handle thick materials, such as latex paints and stains. Its powerful motor ensures that users can cover large areas quickly, reducing the time spent on projects. Furthermore, the unit features an adjustable pressure control, allowing users to tailor the flow rate to their specific needs, which enhances versatility across various surfaces and types of paint.

The sprayer's design emphasizes user-friendliness. It is lightweight and portable, making it easy to transport and maneuver around different workspaces. The innovative design also incorporates an easy-to-clean tip, allowing for straightforward maintenance and ensuring longevity in performance. Additionally, the Graco 333282B is equipped with a flexible hose that accommodates movement without compromising pressure, making it easier to reach tight spaces and high walls.

Safety is also a priority, as the Graco 333282B features a built-in tip guard that protects users from accidental injuries when the sprayer is not in use. The unit is intentionally engineered for stability, minimizing the chances of tipping over during operation.

Overall, the Graco 333282B combines advanced technology, user-friendly features, and durability, making it an excellent choice for anyone looking to achieve exceptional painting results efficiently. Whether tackling large-scale projects or smaller DIY tasks, this sprayer delivers the performance necessary to get the job done right.
Top Page Image Contents