Graco 333282B important safety instructions Key

Page 27

6.Connect a dedicated supply line for each color to the corresponding color valve fitting (C1, C2, etc.) on the outlet color valve stack. Connect the other end of each line to the corresponding color valve fitting on the remote color stack.

7.Connect a supply line from the outlet valve on the bottom of the remote color valve stack to inlet A on the remote mix manifold.

8.Connect the supply line for each catalyst to the corresponding catalyst valve fitting on the inlet catalyst valve stack.

9.Connect a supply line from the bottom fitting of the inlet catalyst valve stack to the inlet manifold of the material B dosing pump.

10.Connect a supply line from the outlet manifold of the material B dosing pump to the bottom fitting of the outlet catalyst valve stack.

11.Connect a dedicated supply line for each catalyst to the corresponding catalyst valve fitting on the outlet catalyst valve stack. Connect the other end of each line to the corresponding catalyst valve fitting on the remote catalyst valve stack.

NOTE: If your system uses more colors than catalysts, branch the catalyst line to connect it to each mix manifold. Install a check valve on each branch of the catalyst line.

NOTE: For ease of maintenance, install a ball valve at all fluid line tees.

12.Connect a supply line from the outlet valve of the remote catalyst valve stack to inlet B on the remote mix manifold.

Installation

13.Connect the static mixer to the outlet valve of the remote mix manifold.

14.Connect a fluid line from the static mixer to the automatic dispense device.

Figure 11 Color Change Connections (Non-Circulating System)

KEY

 

 

A

 

Air inlet

 

W

 

Seal weep and

 

 

lubrication port

S

 

Solvent fitting

C1

 

Color 1 fitting

C2

 

Color 2 fitting

 

 

 

333282B

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Color Change and Remote Mix Manifold Kits Important Safety InstructionsContents Related Manuals Manual No DescriptionManual No Non-Intrinsically Safe Modules ModelsControl Module Pressure Valves Number of Catalyst + Solvent Valves Intrinsically Safe ModulesKit Identification Label 0359Models continue on next 333282B Models Fire and Explosion Hazard Intrinsic Safety Personal Protective Equipment Changing Materials Important Isocyanate ISO InformationIsocyanate Conditions Moisture Sensitivity of IsocyanatesModule Setup the ModulesSetup Non-IS Control Modules Color Change Control Modules, Colors, and CatalystsNon-IS Control Module Switch Settings Inlet ManifoldOutlet Manifold Inlet Manifold Outlet Manifold Solenoid Valve Is Control Module Switch Settings Setup is Control ModulesIs Control Module Valve Solenoid Is Control Module Solenoid ValveGrounding InstallationMounting the Control Modules Air SupplyConnect the Color Change Control Modules Non-Hazardous LocationInstall the Valve Manifolds Install the Valve ManifoldsInstallation Connect Remote Color Change Control Module Hazardous LocationInstall the Remote Valve Manifolds Hazardous Area Install the Remote Mix ManifoldConnect the Valve Air Lines Non-Hazardous AreaInstallation Valve Manifold Stack Schematic Connect the Fluid LinesConnect Non-Circulating Fluid Lines KEY Valve Manifold Connections Circulating System Connect Circulating Fluid LinesKEY Install an Expansion Kit Install an Expansion Kit Low Pressure Valve Manifold Shown Troubleshooting Cause SolutionColor Change Solenoid Valves Replace the Color Change Board Fuse, Color Change Board Troubleshooting Power Module Electrical SchematicsEfcm Cable J8 J9 J15 J16 J14 J10 J15 J16 Electrical Schematic, Sheet 3, Hazardous Location Optional Cables and Modules Replace a Color Valve RepairReplace a Solenoid Replace the Color Change Board FuseFuse Description Control Module Repair Non-IS Module Shown Replace the Color Change BoardNon-IS Color Change Kits PartsPart Description Qty Low Pressure Non-IS KitsHigh Pressure Circulating Color Change Kits High Pressure Non-IS KitsKit No Kit Description High Pressure Non-Circulating Color Change KitsParts Description Qty Is Color Change KitsAll available kits Parts Low Pressure is KitsHigh Pressure is Kits Circulating Valve Manifold Kits Kit No Valve Manifold KitsLow Pressure Valve Manifold Kits Non-Circulating Valve Manifold Kits Kit No SeriesValve Manifold Kit Parts Kit No Parts Low Pressure Circulating Valve Manifold Kit Part Quantities Circulating Valve Manifold Kits Kit No Series High Pressure Valve Manifold KitsValve Manifold Kit Parts 24T581 Parts High Pressure Circulating Valve Manifold Kit Part Quantities Parts Non-IS Color Change Control Modules Color Change Control Module KitsKit No Position Solenoid Plug Tie Strap Ferrule Connector Connector 310 321 322 Fitting 305 324Non-IS Control Module Part Quantities Is Color Change Control Modules Is Control Module Part Quantities 16M00Parts High Pressure Acid-Compatible Expansion Kits Expansion KitsNon-IS Expansion Kits Low Pressure Expansion Kits High Pressure Expansion KitsLow Pressure Expansion Kits Is Expansion KitsDimensions Manifold Mounting Bracket, Non-IS 11.44 312 Mm diameter Dimensions Dimensions Color Change Kits Metric Technical DataGraco Information Graco Standard Warranty

333282B specifications

The Graco 333282B is a high-performance airless paint sprayer, designed specifically for both DIY enthusiasts and professional painters who require efficiency and precision. This versatile sprayer is suitable for a variety of projects, including home renovations, commercial applications, and creative crafts.

One of the standout features of the Graco 333282B is its robust TrueLife airless technology, which allows for a smooth and even finish without the hassles associated with traditional paintbrushes or rollers. This technology minimizes overspray while ensuring consistent paint delivery, making it an optimal choice for achieving professional-quality results.

In terms of power, the Graco 333282B incorporates a reliable electric motor that provides enough strength to handle thick materials, such as latex paints and stains. Its powerful motor ensures that users can cover large areas quickly, reducing the time spent on projects. Furthermore, the unit features an adjustable pressure control, allowing users to tailor the flow rate to their specific needs, which enhances versatility across various surfaces and types of paint.

The sprayer's design emphasizes user-friendliness. It is lightweight and portable, making it easy to transport and maneuver around different workspaces. The innovative design also incorporates an easy-to-clean tip, allowing for straightforward maintenance and ensuring longevity in performance. Additionally, the Graco 333282B is equipped with a flexible hose that accommodates movement without compromising pressure, making it easier to reach tight spaces and high walls.

Safety is also a priority, as the Graco 333282B features a built-in tip guard that protects users from accidental injuries when the sprayer is not in use. The unit is intentionally engineered for stability, minimizing the chances of tipping over during operation.

Overall, the Graco 333282B combines advanced technology, user-friendly features, and durability, making it an excellent choice for anyone looking to achieve exceptional painting results efficiently. Whether tackling large-scale projects or smaller DIY tasks, this sprayer delivers the performance necessary to get the job done right.
Top Page Image Contents