INSTALLATION
A modular (Universal Service Order Code) USOC:
RJIIC outlet jack (illustrated) | iS required.’ | - |
ln~lation of this telephone in locations with ~prong jack or with
store can advise you regarding the proper tinverter.
Installation Note: Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs; to minimize or Drevent such interference, the base of the cordless te(ephone should not be placed near or on top of a ~ or VCR;
and, if interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.
1.Insert antenna and screw into place.
2.This telephone is equipped with a Cord Wrap for the straight LINE TELEPHONE CORD. This Cord Wrap is located on the bottom of the BASE.
Wrap TELEPHONE LINE CORD around cord wrap leaving enough of cord free to reach outlet jack.
3.Plug TELEPHONE STRAIGHT CORD into
Modular wall jack.
4.Plug the smaller, “U’ shaped end of the AC ADAPTER into back of unit.
AC POWER SUPPLY CORD must be fed through the STRAIN RELIEF on bottom of base to prevent cord slippage. (see inset).
Note: Use only GE AC ADAPTER and POWER SUPPLY CORD Model
:A.
:- ‘-
:
:
.
s
.
●
~B.
:
●
:
t
.
s
●
●
●
●
●
●
●
:
●
●
:
●
:
s
●
●
●
●
●
●
●
●
●
4
●
●
Telephone Outlet Requirements
Quick Set-up
8