GE APE08 Installation Instructions, 6INSTALL WINDOW SLIDER IN WINDOW, Inside

Installation Instructions

Instructions for installing the window slider in a sliding window. If you have a double-hung window, see instructions on pages 10 and 11.

6INSTALL WINDOW SLIDER IN WINDOW

AIf the window slider is shorter than the height of the window, pull the sliding arm out to the height of the window.

If the window slider is longer than the height of the window, cut the slider arm to the height of the window.

If the two-piece window slider is too short for the height of the window, attach and use the third piece of the slider.

Inside

Third piece of slider for extra long windows

BCut the window seal (adhesive-backed) to the window height and stick the adhesive side to the inner window sliding face, as shown above.

CAttach the top of the slider to the window face using a large wood screw through one of its holes.

Large wood screw

Inside

DSlide the window against the edge of the window slider.

EIf applicable, hook the two window slider brackets over the side edge of the window slider and attach to the inner window sliding face using two large wood screws.

7INSTALL WINDOW LOCKING BRACKET

Attach the window locking bracket with one large wood screw.

Window locking bracket

12