Plantronics CS510A, CS520A manual Headset set-up, Adjust the headband

Page 7

Headset set-up

Your headset comes fully assembled. You can adjust the headband for a bet- ter fit and the mouthpiece for optimal performance.

Adjust the headband

1To adjust the headband, lengthen or shorten the band until it fits comfortably. The click-stop feature keeps the headband securely adjusted.

2Position the headset so that the leather ear cushion(s) sit comfortably over the centre of your ear(s). For the C510 headset, position the stabiliser T-bar above your ear.

3For a tighter fit, gently pull the opposite end of the headset inwards as shown.

Adjust the mouthpiece

1Carefully bend and shape the boom with both hands as shown. Avoid bending or twisting the boom near the microphone or earpiece.

2Position the click-stop turret and boom so that the microphone is two finger widths from the corner of your mouth.

50.8 mm

front back

Image 7

Contents CS510A/CS520A Contents Welcome What’s in the box Base overview Base and headset basicsAccessories Headset set-up Adjust the headbandConnect your desk phone Connect the powerCharge the headset Desk phone standard Connect and configure your desk phoneCheck configuration and make a test call USE Desk phone plus HL10 lifter sold separatelyAdditional parts if required If you do not hear a dial toneDesk phone plus EHS cable Position your base Headset controls Your headsetTalk time Muting your headset during a call BatteryAdjusting your headset volume Low battery warningYour base Base phone button and switches Subscription buttonAuto answer switch Wideband/narrowband audio switchAnswer an incoming call Conference up to three additional headsetsDaily use Place an outgoing callHeadset TroubleshootingDesk phone Need More HELP?