7) Entering Touch Tone Numbers
After your call is connected or during an active call, you may need to dial extension, first press and hold the Talk button and make sure that you hold the talk button until you hear the voice prompt “Say Extension Number”, release the talk button and say the extension numbers.
Confirmation Commands Supported
Command | Command Description |
Yes | Confirm |
No | Repeat or |
| numbers after the voice prompts says “Finish?” |
Cancel | Cancel and exit |
Extension | Enter extension (only available after entering |
| numbers by using Voice Keypad) |
Repeat | Repeat or |
| says “Finish?” |
Voice Keypad (VKP)
Keypad | Keypad Description |
0 | Number zero (Note: please say “zero” since the |
| program will only recognize “zero”) |
1 | Number one |
2 | Number two |
3 | Number three |
4 | Number four |
5 | Number five |
6 | Number six |
7 | Number seven |
8 | Number eight |
9 | Number nine |
11