Sanyo CE42LH2WP, CE42LH2DPB instruction manual RS232C Command Tables

GB RS232C COMMAND TABLES GB

N Functional Execution Command Table

Command	Item
C00	POWER ON
C01	POWER OFF
C03	POWER ON/ OFF (toggle)
C10	Wide toggle
C22	Input
C24	Wide “Natural” direct
C25	Wide “Zoom 16:9” direct
C26	Wide “Title in 16:9” direct
C27	Wide “Zoom 14:9” direct
C28	Wide “Title in 14:9” direct
C29	Wide “Full” direct
C30	Picture
C0F	Wide “Normal” direct
C70	AV1 direct
C71	RGB direct
C72	AV2 RGBHV direct
C73	AV2 YPbPr direct
C74	AV3 direct
C75	DVI direct
C76	PC direct
C64	PC Auto adjust
C92	Factory settings
CF PSAVE ON	Power save ON
CF PSAVE OFF	Power save OFF
CF CLOK ON	&KLOGORFN21
CF CLOK OFF	&KLOGORFN2))
CF DEA RMCY	RC inhibition OFF
CF DEA RMCN	RC inhibition ON

N Image control Read Command Table

Status read command	Item
CR BRIGHT	Status of Brightness.
CR CONT	Status of Contrast.
CR COLOR	Status of Color.
CR TINT	Status of Tint.
CR SHARP	Sharpness.
CR WBAL	Status of White Balance Mode informa-
	tion.
CR WBAL-R	Status of White Balance Red.
CR WBAL-G	Status of White Balance Green.
CR WBAL-B	Status of White Balance Blue.
CR NZRED	Status of Noise reduction setting.
CR FILM	Status of Film mode setting.
CR IMAGE	Status of Image selection.
	(The same as PICTURE mode)
CR DCDI	Status of DCDi setting.
CR ACCACM	Status of ACC/ACM setting.
CR CCS	Status of CCS setting.
CR MPEGNR	Status of MPEG NR setting.

N PC Read Command Table

Status read command	Item
CR H-POS	Status of Horizontal position.
CR V-POS	Status of Vertical position.
CR PHASE	Status of PHASE value.
CR CLOCK	Status of CLOCK value.

N Input Read Command Table

Status read command	Item
CR INPUT	Status of Input selection.
CR SOURCE	Status of Input source mode.
CR SYSTEM	Status of system of Input mode.

N Screen Read Command Table

Status read command	Item
CR SCREEN	Status of screen size.
	(The same of WIDE mode)

18