Sanyo CE42LH2WP, CE42LH2DPB instruction manual Anti-Tamper Ink, Screws

ANTI-TAMPER INK

•Anti-tamper ink has been placed on the screws on the back plate, AV insert and outer back cabinet.

•This is to identify if the screws have been removed. Any attempt to remove the anti-tamper ink will be CLEARLY visible.

•In the event that the back plate is removed, the sealing of the set will be compromised, therefore, SANYO can not accept liability for any related failure.

ANTI-TAMPER INK

SCREWS

‡$OOEDFNSODWHÀ[LQJVFUHZVXWLOLVHUXEEHUVHDOLQJZDVK- HUV7KLVLPSURYHVWKHDLUWLJKWLQWHJULW\RIWKHÀ[LQJDQG therefore MUST NOT be removed.

‡2QO\ZDOOPRXQWÀ[LQJDQGWHUPLQDOFRYHUVFUHZVPD\ be removed by the installer. Under no circumstances should non-SANYO screws be used as replacements.

RUBBER WASHER

SECURITY FIXING POINT (42 inch model only)

‡$VHFXULW\À[LQJSRLQWLVSURYLGHGRQWKHEDFNSODWHLQ order to secure the monitor to the installation point with a security device.

•This is NOT for lifting purposes. Lifting the monitor by

WKHVHFXULW\À[LQJSRLQWZLOOFDXVHGHIRUPDWLRQRIWKH back plate, resulting in possible breakdown of the weath- erproof seal.

4