Sanyo CE42LH2WP, CE42LH2DPB GB Installation, Controls and Menus, Menu Operation, Picture menu

GB INSTALLATION GB

Controls and Menus

q w

åThe LCD display has a Standby light to show there is power.

Switching into/from standby mode

The Standby mode is used for switching the LCD monitor off for short periods of time. In standby mode the monitor is switched off but is still receiving mains power.

L To turn the monitor into standby mode, press the button. The blue power indicator illuminates more brightly.

L To turn the monitor ON from standby mode, press the button again.

,I\RX¿QGWKHSRZHULQGLFDWRUÀDVKLQJGLVFRQQHFW power cord from the power outlet and contact our 6HUYLFHGHVN

7KLVZDUQLQJLVDVLJQWROHW\RXNQRZWKDWWKH power protection function of this TV set is now operating.

Menu Operation

Many of your monitors functions are controlled through the menu function, using the remote control.

MENU
	Picture	Brightness
		Contrast
		Color
		Tint (only if NTSC equipment is detected)
		Sharpness
		White Tone					White Tone / R / G / B
	Sound	Advanced Setting									DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode
		Treble
		Bass
		Balance							On / Off
	Time	Bass Expander
		Current Weekday
		Current Time
		Schedule			1 - 20
		Weekday
		Time
		Action		Power On / Power Off
		On Program					AV1 / RGB / AV2 / AV3 / PC / DVI / Network
	Setup	Active		On / Off
		Menu Setup						Language / H/V-Position / Duration / Transparence
		PIP / POP Setup								PIP/POP Mode / Main/Sub Source / PIP Position
		Initial Settings							Western / Eastern / Russian / Arabic / Farsi
		Text Language
		Tile Mode			Tile Mode Active / H/V_Sets / H/V Location / Bezel H/V Adjustment
		AV2 Setting				RGBHV / YPbPr
		XGA Mode				XGA / WXGA 1366x768
		PC Power save							On / Off
	PC Adj.		Auto Adjust
			H-Position
			V-Position
			Clock
			Phase

During menu operation the bottom of the on screen display will show which controls can be used for menu navigation.

Press the MENU button to enter the main menu. Whenever main menu is accessed initially, PICTURE will be the default selection.

A sub menu is selected using the or button and pressing the or button when the required sub menu is highlighted. :KHQ\RXKDYH¿QLVKHG\RXFDQSUHVVWKHBACK button to return to the previous menu, press the MENU button to exit the menu operation.

çControl buttons (bottom corner of back cover)

Menu button: Used to display or cancel main menu.

Input/4button: Switch between AV1, RGB, AV2, AV3, PC , DVI RU1HWZRUNPRGH,WLVDOVRXVHGWRSURYLGHVXE menu selection from the Main Menu.

or buttons: provide up and down adjustments.

button: To switch to standby mode (to switch off completely disconnect the monitor from the power supply).

Picture menu

1.Press the MENU button. PICTURE will be the default selection. Press the or button to enter.

Set the picture settings for your “personal” preference.

2.Use the or button to select eg. Brightness and the or button to adjust levels.

N White Tone

May be used to adjust the color tone of the picture. Use the or

button to select White Tone and press the or button to enter the sub menu. You can select Personal, Cool, Standard or Warm settings by using the or button. To adjust the color tone of the picture by using the or button to select Red(R), Green(G) or Blue(B) and the or button to adjust levels.

These settings will be stored in personal mode automatically.

8