Sanyo CE42LH2DPB, CE42LH2WP instruction manual Installing Position, Wire Assembly, To Connect

INSTALLING POSITION

When the monitor installed outside, it SHOULD NOT set in a position where the screen is subjected to direct sun light.

If it can’t be done, please prepare adequate shading. Di- rect sun light can cause the screen surface temperature WRULVHDERYHWKHPD[LPXPRSHUDWLQJUDQJH

This causes a black shadow to appear on the screen, which will disappear when the screen temperature returns

WRZLWKLQVSHFLÀFDWLRQ

WIRE ASSEMBLY

1.Connect the in-line waterproof AC cord, line up and push together connectors A & B so they are tight and then twist C until A & B cannot be pulled apart. To disconnect unscrew C and pull con- nector A & B apart.

To Connect To Disconnect

A BC

C

A B

2.Remove the covers A for access to connect required cables. Re-position the covers and replace screws.

If LD Net connection is required remove cover B and connect cable, then re-position cover B and replace screws.

B B

A

A

English

DO NOT REMOVE SILICA GEL SACHETS FROM INSIDE LD-NET TERMINAL COVER (B) AND TERMINAL COVER (A).

Thank you for your attention.

We hope our Weatherproof monitors are to your satisfaction.

7