INSTALLATION
The Blue Parrott B100 connects directly into the phone line wall jack. You may add a telephone directly to the B100 system, or you can install the B100 independently to its own telephone wall jack.
However, if you install the Blue Parrott B100 base to a telephone wall jack separate from your phone’s location, be sure it is installed within the acceptable range from your phone so that you will be able to dial out while wearing your headset (see Range on page 8).
TO WALL JACK
Refer to label on base for connections.
STEP 1: Connect the Blue Parrott B100 to the telephone wall jack.
Take the “Line” cord that came with this unit and plug it into the “LINE” port on the bottom of the Blue Parrott B100 base. Plug the other end into your telephone wall jack (if your phone is plugged in here, disconnect your phone from the wall).
TO WALL JACK TO TELEPHONE
STEP 2 (Optional): Connect the Blue Parrott B100 to your telephone Take the cord that you removed from the wall jack (it should still be attached to your phone) and plug it into the “PHONE” port on the bottom of the Blue Parrott B100 base.
Blue Parrott B100 Wireless Headset
9