End the Call
Quickly press the multifunction button on the headset for 1 second. Afterwards, you will hear a single beep. The call will be disconnected and the headset will revert to Standby Mode.
Adjust Receive Volume
To adjust the volume in your earpiece, press the increase or decrease volume button for 1 second, then release. Repeat until volume is at desired level. You will hear a single beep each time you press the button.
Mute The Microphone On The Headset
To mute the microphone, press and hold down the Increase Volume button for 4 seconds. You will hear a beep and the microphone will mute. A beep will be heard periodically indicating that the microphone is in Mute Mode. This will not be heard on the other end of the call.
Un-Mute The Microphone On The Headset
To
Switch From Handset To Headset While On A Call
1.Before hanging up the handset, make sure the headset is in Standby Mode and then activate the headset by pressing the multifunction button for 1 second. Afterwards, you will hear a single beep and both handset and headset will be on the call.
2.Next, hang up the handset as you normally would. The call will remain active on the headset until the parties end the call.
Switch From Headset To Handset While On A Call
1.Before disconnecting the headset from the call, remove the handset from the phone’s cradle (corded phones) or turn the handset on (cordless phones). Both the headset and the handset will be on the call.
Blue Parrott B100 Wireless Headset
15