Blue Parrott B100 Wireless Headset

Before Pairing : Take the B100 Headset and Base Out of Standby Mode

Before pairing remove the B100 headset from the base and take them both out of Standby Mode:

To take the B100 headset out of Standby Mode: Press and hold down the multifunction button for about 4 seconds. You will hear 3 beeps in the headset that descend in tone and the yellow light on the headset will stop flashing.

To take the B100 base out of Standby Mode: Press and hold down the pairing button for about 4 seconds. The yellow light on the base will stop flashing.

Pair the Blue Parrott B100 Base With The Blue Parrott B100 Headset

Be sure the headset is out of the base and both are out of Standby Mode.

1.Turn off the alternate Bluetooth product or keep it at least 50 feet away.

2.Position the B100 base and B100 headset no more than 3 feet apart.

3.Press and hold down the pairing button on the B100 base for approximately 5 to 15 seconds until the red and orange indicator lights on the base begin to flash alternately. Release the pairing button.

4.Press and hold down the left side of the multifunction button on the B100 headset until you hear a series of melodic tones and the yellow and red indicator lights begin to flash alternately. Release the multifunction button.

5.In 5 to 15 seconds, the indicator lights on the B100 base and headset will cease flashing.

6.Successful pairing has been completed.

Pair the Blue Parrott B100 Base With A Different Bluetooth Headset

See compatibility section of this user guide for headset compatibility information. Be sure the B100 headset is out of the base and both are out of Standby Mode.

1. Position the B100 base and your alternate headset no more than 3 feet apart.