Call Waiting / Three-Way Conferencing

2.Next, quickly press the multifunction button on the headset for 1 second. Afterwards, you will hear a single beep in the headset as the headset disconnects. The call will remain active on the handset until the parties hang up.

If your phone service includes call waiting or three-way conferencing, it is possible to use these services with your Blue Parrott B100 headset. The multifunction button on the headset will take the place of the Flash button (cordless) or hook switch (corded) on your phone.

Call Waiting

1.When a second call is incoming, you will hear your service provider’s standard call-waiting tone in your headset.

2.Be sure your telephone handset has been hung up (corded) or turned off (cordless).

3.Press the multifunction button on the headset twice rapidly. Do not hold down the button too long or you will disconnect the call.

4.You will be connected to the second call and the first call will be put on hold.

5.You can switch between callers as often as you like by pressing the multifunction button on the headset twice rapidly.

6.When you are ready to hang up, quickly press the multifunction button for 1 second. Afterwards, you will hear a single beep and the calls will be disconnected.

Note: If you do not want to answer the second incoming call, simply keep talking. You will hear the beep periodically reminding you of the second call until you retrieve the call or the caller hangs up.

Three-Way Conferencing

It is recommended that you initiate three-way conferencing on your telephone first, and then switch from the handset to the headset after the parties are on

VXI B100 manual Call Waiting / Three-Way Conferencing