the call (see Switch From Handset To Headset While On A Call on page 15). Or if desired, you may initiate
1.Be sure the headset is in Standby Mode.
2.Press the Multifunction button for 1 second, and release. After a brief pause, you will hear a dial tone.
3.Remove the handset from the cradle (corded phone), or push the Talk/On button (cordless phone) and dial one of your parties. When the phone begins to ring, hang up (or turn off) the handset.
4.When the second party answers, tell them to stay on the line.
5.Initiate the flash/hook switch function by pressing the multifunction button twice rapidly. Do not hold the button down too long or you will disconnect the call. Afterwards, you will hear a beep followed by a dial tone.
6.Remove the handset from the cradle (corded phone) or push the Talk/On button (cordless phone) and dial the third party. When the phone begins to ring, hang up (or turn off) the handset.
7.When the third party answers, press the multifunction button twice rapidly to connect all 3 parties. Do not hold the button down too long or you will disconnect the call.
8.To disconnect all parties, press the Multifunction button for 1 second, and release.
PAIRING
For your convenience, the Blue Parrott B100 base and headset have been paired in advance at the factory. However, if you have since paired the headset or the base with an alternate Bluetooth product, you will need to pair the Blue Parrott B100 base and headset together again.
See page 5 and 6 for location of button controls.
Blue Parrott B100 Wireless Headset
17