IP8830 Broadworks IP Phone
User Guide
5. Setting Your Preferences
In the LCD Menu, you can set various preferences for the IP Phone. Settings you can adjust include:
-LCD contrast
-Ring Setting
-Ringer off
-Headset auto mode
-Flexible button settings
-Time Configuration
-Outgoing Call Lock
-Speed Number Dialing
-Key Tone
-Bluetooth
-Language
The following paragraphs provide detailed instructions for each of the preferences as well as descriptive information for each.
5.1. LCD Contrast
The contrast of the LCD is adjustable for best viewing angle.
To adjust the LCD contrast:
oPress the Setting (
) button.
oDial 3, or move the cursor to 3.Phone Settings using the
oDial 1, or move the cursor to 1.LCD Contrast using the
softkey. |
|
|
|
| ||||
o Press | the |
| softkey to decrease the contrast, or press |
|
|
| ||
Down |
|
| 08:30 | |||||
|
| |||||||
|
|
| ||||||
the | Up |
|
|
|
|
| ||
softkey to increase the contrast. |
| LCD Contrast |
| |||||
o Move to another parameter with the navigation buttons and | ■■■■□□□ |
| ||||||
| Down | Up | ||||||
continue the session or press the Setting ( | ) button to |
| ||||||
exit the configuration session.
5.2. Ring Setting
Ring settings determine the ring type (tone) for the phone. In addition, the ring type for each line can be set with immediate or delayed audible notification. Note the ring type set for a contact in the Phone Book has priority over the phone or line settings, see section 4.2.
5.2.1. Setting the Ring Type
The IP Phone uses one of fourteen distinctive ring types for incoming call notification. Nine are stored in the memory of your IP Phone and the remaining five (5) must be downloaded prior to use. By assigning different ring signals to closely located phones, you can identify the ringing phone. The ring type assigned for the IP Phone is the “Default Ring Type” for incoming calls to the phone and is set to “ringer off” or one of the fourteen tones.
13 | Dec. ‘08 |