Setting Line Ring Type and Delay

IP8830 Broadworks IP Phone

User Guide

To set the ring type for the phone:

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the

OK softkey.

oDial 2, or move the cursor to 2.Ring Setting using the Previous-Next softkeys and press the OK

softkey.

o Dial

1, or move the cursor to 1.Default Ring Type using

08:30

softkeys and press the

softkey. An

the

Ring Setting

asterisk, », displays in front of the current setting.

>1.Default Ring Type

o Select the ring type using the

softkey. Press the

Play

softkey to hear the selected tone.

08:30

o Press the

softkey to save the selected the ring type.

Default Ring Type

o Move to another parameter with the navigation buttons and

*Type1

Play

continue the session or press the Setting (

) button to exit

the configuration session.

5.2.2. Setting Line Ring Type and Delay

You can assign each line with a different ring type (tone) to distinguish which line is ringing. Selections for the type include one of up to fourteen tones, “Ringer Off” or “Set to Default”, see section 5.2.1. Of the fourteen tones, five are permanently stored in the memory of the phone and the remaining five must be downloaded before use. In addition, for each line the ring signal can be immediate or delayed. The delay is set in 1 second increments from 0 (no delay) to 10 seconds.

To set the ring type for a line:

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the

OK softkey.

oDial 2, or move the cursor to 2.Ring Setting using the Previous-Next softkeys and press the OK softkey.

o Dial the Line number plus one (2 for Line 1, 3 for Line 2,

08:30

Ring Setting

etc.), or move the cursor to Line n Configuration using the

softkeys and press the

softkey. The

>2.Line 1 Configuration

value of n is the Line button number.

o Dial 1, or move the cursor to 1.Ring Type using the

08:30

softkeys and press the

softkey. Note

Line 1 Configuration

the line number displays in parenthesis after “Ring Type”.

>1.Ring Type

o Select the ring type using the

softkey. Press the

Play

softkey to hear the selected tone. An asterisk, », displays

08:30

in front of the current setting.

Ring Type (1)

o Press the

softkey to save your entry.

*Set to Default

Play

o Move to another parameter with the navigation buttons and

continue the session or press the Setting (

) button to exit the configuration session.

To set delayed ring for a line:

oPress the Setting () button.

Dec. ‘08