Ringer Off, Enabling Automatic Headset Operation

IP8830 Broadworks IP Phone

User Guide

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the OK softkey.

oDial 2, or move the cursor to 2.Ring Setting using the Previous-Next softkeys and press the OK softkey.

o Dial the Line number plus one (2 for Line 1, 3 for Line 2,

08:30

etc.), or move the cursor to Line n Configuration using the

Ring Setting

softkeys and press the

softkey. The

>2.Line 1 Configuration

value of n is the Line button number.

Dial 2, or

move

the cursor to 2.Delayed

Ring using the

08:30

softkey. . Note

softkeys and press the

Line 1 Configuration

the line number is shown in parenthesis after “Delayed Ring

>2.Delayed Ring Timer

Timer”.

o Using the dial pad enter the desired delay up to 10 seconds

08:30

in one-second increments, zero is no delay. The

Delayed Ring Timer (1)

backspace softkey will delete the previous character and

Clear

the

softkey deletes the entire entry.

Clear

oPress the OK softkey to save your entry.

oMove to another parameter with the navigation buttons and continue the session or press the Setting () button to exit the configuration session.

5.3. Ringer Off

The IP Phone can be programmed not to ring when an incoming call is received. To set the Ringer Off parameter:

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the

OK softkey.

oDial 3, or move the cursor to 3.Ringer Off using the

softkeys and press the

softkey.

08:30

Ringer Off

o Press the

softkey to enable Ringer Off, or press the

Yes

Current value is ‘No’.

softkey to disable Ringer Off.

Yes

oMove to another parameter with the navigation buttons and continue the session or press the Setting () button to exit the configuration session.

5.4. Enabling Automatic Headset Operation

Your IP8830 Phone supports use of a headset with a standard RJ-11 jack. In the Headset Auto Mode, pressing a line button automatically connects audio to the headset. Also, redial, Speed dial, Speed number dialing and click-to-call place calls with audio through the headset.

To enable Headset Auto Mode:

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the

OK softkey.

oDial 4, or move the cursor to 4.Headset Auto Mode using the Previous-Next softkeys and press the OK softkey.

Dec. ‘08