Mitel IP8820 manual Ringer Off, Enabling Automatic Headset Operation

IP8820 Broadworks IP Phone

User Guide

oDial 2, or move the cursor to 2.Ring Setting using the Previous-Next softkeys and press the OK softkey.

o Dial the Line number plus one (2 for Line 1, 3 for Line 2,

Ring Setting

etc.), or move the cursor to Line n Configuration using the

>2.Line 1 Configuration

Previous

-

Next

softkeys and press the

OK

softkey. The

Previous

Next

OK

value of n is the Line button number.

o Dial

2, or move the cursor to 2.Delayed Ring Timer using

Line 1 Configuration

the

Previous

-

Next

softkeys and press the

OK

softkey. .

>2.Delayed Ring Timer

Note the line number is shown in parenthesis after “Delayed

Previous

Next

OK

Ring Timer”.

o Using the dial pad enter the desired delay up to 10 seconds

Delayed Ring Timer (1)

in one-second increments, zero is no delay. The

0

backspace softkey will delete the previous character and

Å

Clear

OK

the

softkey deletes the entire entry.

Clear

o Press the

softkey to save your entry.

OK

oMove to another parameter with the navigation buttons and continue the session or press the Setting () button to exit the configuration session.

5.3. Ringer Off

The IP Phone can be programmed not to ring when an incoming call is received. To set the Ringer Off parameter:

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the OK softkey.

oDial 3, or move the cursor to 3.Ringer Off using the Previous-Next softkeys and press the OK softkey.

o	Press the	Yes	softkey to enable Ringer Off, or press the		No	Ringer Off
	softkey to disable Ringer Off.					Current value is ‘No’.
o	Move to another parameter with the navigation buttons and					Yes	No
	continue the session or press the Setting (			) button to
	exit the configuration session.

5.4. Enabling Automatic Headset Operation

Your IP8820 Phone supports use of a headset with a standard RJ-11 jack. In the Headset Auto Mode, pressing a line button automatically connects audio to the headset. Also, redial, Speed dial, Speed number dialing and click-to-call place calls with audio through the headset.

To enable Headset Auto Mode:

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the OK softkey.

oDial 4, or move the cursor to 4.Headset Auto Mode using the Previous-Next softkeys and press the OK softkey.

o Press the		Yes		softkey to enable the Headset Auto Mode or	Headset Auto Mode
press the	No		softkey to disable the Headset Auto Mode.		Current value is ‘No’.
					Yes	No
15						Dec. ‘08