Handset Operation
Making a Call
Making a Call
Note If you are talking on a call and you have reached the range limit, move back in range within 35 seconds or the call is dropped. This guide assumes that F1 is an extension key (PDN) and F2 is an outside line key.
Internal Call
1.Pick up the handset and press F1. The message “ACQUIRING LINK” displays on the LCD.
If the connection is made between the handset and base, you will see the current volume setting (shown right) for approx. two seconds. The F1 LED turns on.
If the connection is not made or the handset is at the
range limit of the
2.When you hear a dial tone, enter the number you are calling. The numbers display on the LCD.
3.When you finish the call, press the Talk button, this hangs up the telephone and puts it in Auto Standby.
External Call
1.Press F2. The handset starts to establish a connection with the base unit.
If the connection is made between the handset and base, you will see the current volume setting for approx. two seconds. The F2 LED turns on.
2.When you hear a dial tone, enter the number you are calling. The numbers display on the LCD
(shown right).
3. When you finish the call, press the Talk button, this hangs up the telephone and puts it in Auto Standby.
30 | Strata CIX and CTX |