MEMORY DIALING
You can store up to 10 telephone numbers in memory.
Notes
In memory dialing operation,
•If more than 20 seconds elapse between pressing buttons, the operation will be cancelled and you must start over again.
•If you press a wrong button, an error tone sounds and the handset returns to standby mode.
•If a call comes in, the operation will be cancelled and you will hear the ring.
1. STORING NUMBERS
You can store up to 16 digits including #, 
and PAUSE in one memory address.
qPick up the handset from the base unit. (Do not press TALK ).
wPress MEM .
eDial the telephone number you wish to store (up to 16 digits).
rPress MEM .
tEnter the memory address (0 to 9) at which you wish to store the phone number dialed in step 3.
You will hear a confirmation tone when the number is successfully stored.
To store more telephone numbers, repeat steps w to t.
yReturn the handset to the base unit or press MEM .
uRecord the telephone numbers on the SPEED DIAL INDEX CARD, and place it on the back of the handset.
EXAMPLE: To store 9012345 in memory address 3
MEM 9 0 1 2 3 4 5 MEM 3
14