Hold and Page
The Hold and Page feature allows you to put a call on hold and page without having to use a feature key or code. You can also page after parking a call; see Call Park - Specific Orbit.
To place a call on hold and page:
1.Press the red HOLD key twice.
2.Make the page.
To place a call on hold and not page:
1.Press the red HOLD key.
2.Press any key except for the red HOLD key. The call is on hold.
Transfer
To Transfer an active call:
1.Press TRANS/CONF.
2.Dial the number of the third party.
3.Do one of the following:
To complete the Transfer, hang up.
To announce the Transfer, wait for an answer, consult, and hang up.
To cancel the Transfer, press CANCEL.
To transfer an active call during headset operation:
1.Press TRANS/CONF.
2.Dial the number of the third party.
3.To complete the Transfer, press the Release feature key.