Mitel 5215 manual To monitor a a call, To use Door Opener

Page 42

To monitor a a call:

1.Lift the handset.

2.Dial *45 followed by the number of the extension you wish to monitor. If the user is on a call, INTRUDING followed by the user’s extension number appears in your telephone display.

If the user is not on the phone, you hear busy tone and the user's extension number followed by the words IS IDLE are shown in your telephone display.

3.Press Trans/Conf to form a three-party conference with the user and the other party.

-OR-

Press Exit to end the monitoring session.

NOTE: If you wish to continue monitoring after exiting the conference, you must set up the monitor again.

Door Opener

Door Opener allows you to operate a third-party door opener. For example, when someone requires entry into a third-party building, a designated extension (or extensions) rings and on answering, the extension user can press a feature key or dial a feature access code to open the door.

To use Door Opener:

zPress Door Opener or press *66.

-38-

Image 42
Contents User Guide Page Contents Using Advanced Features TRANS/CONF, CANCEL, REDIAL, SPEAKER, MESSAGE, Microphone About Your PhoneTelephone status indicators Designation CardTips for Your Comfort and Safety Customizing Your Phone Handset Receiver Volume ControlSpeaker Volume Control Ringer ControlFeature Keys To program a feature keyTo display information about a key Language Change To change the display languageMake an External Call KTS Making and Answering CallsMake a Call PBX Make an Intercom Call KTSAnswer a Call RedialTo redial the last number that you manually dialed Speed Call Keys To dial a stored Speed Call numberTo store a Speed Call number Speed Call Personal To dial a stored personal Speed Call numberTo store a personal Speed Call number Handsfree Operation Call Handling Auto-AnswerHold To Transfer an active call TransferTo place a call on hold and not To transfer an active call during headset operationTo leave a Conference ConferenceSwap To alternate between the two partiesCall Forward To program Call ForwardTo turn Call Forward on and off once it has been programmed Call Forward Enhanced To turn Call Forward on and off once it has been programmed Call Forward No Internal/External Split Call Forward No Internal/External Split Enhanced To cancel Call Forward Im Here from the station that set it Call Forward Im HereTo force an incoming call to be forwarded Call Forward ForcedCall Forward Toggle To toggle call forwardMessaging Advisory Messaging CallbackCallback Using Advanced FeaturesAccount Codes To enter an Account Code at the start of a callCall Park To park a call that is on your prime line Line 1 keyTo retrieve a parked call from another phone Call Park System To park a call in system orbitTo return to the caller if all the system orbits are busy Call Pickup To retrieve a call parked using an Orbit # feature keyCall Park Specific Orbit To park a call in a specific orbitDo Not Disturb Call Park Destination PhoneCampon Override IntrudePaging PA Paging DirectPaging All Set Paging Group Handset MuteDirect Station Select/Busy Lamp Field DSS/BLF DSS/BLF/Call Pickup Direct Page/BLFDSS/BLF/Direct Page/Call Pickup Headset Operation Headset with Feature Control Switch Headset OperationPark To park a call and page a call To stop and save a recording Record a CallTo start recording while on a 2-party call To stop and erase a recording To set or modify a timed reminder To cancel a timed reminder Reminder To acknowledge the reminder indicated by five ringsReminder Multiple PhonebookCall Monitoring Few conditionsDoor Opener To monitor a a callTo use Door Opener Feature Access Codes
Related manuals
Manual 34 pages 32.64 Kb Manual 32 pages 49.68 Kb Manual 29 pages 22.94 Kb