| ENGLISH | |
Charge the battery | 200 hours of standby time. However, | |
The headset has an internal, | the talk and standby times may vary | |
when the headset is used with | ||
nonremovable, rechargeable battery. | ||
different mobile phones or other | ||
Do not attempt to remove the battery | ||
compatible Bluetooth devices, usage | ||
from the headset, as you may damage | ||
settings, usage styles, and | ||
the headset. | ||
environments. | ||
1. Connect the charger to a wall | ||
When battery power is low, the | ||
outlet. | ||
headset sounds a series of beeps and | ||
2. Connect the charger cable to the | ||
the red indicator light starts to flash. | ||
charger connector on the headset. | ||
Switch the headset on or off | ||
The red indicator light is on while | ||
charging. It may take a while | To switch on, press and hold the power | |
before charging starts. If charging | key until the green indicator light | |
does not start, connect the charger | starts to flash. | |
again and retry. Charging the | ||
To switch off, press and hold the | ||
battery fully may take up to | ||
power key until the red indicator light | ||
2 hours. | ||
is displayed briefly. | ||
3. When the battery is fully charged, | ||
Pair the headset | ||
the red indicator light turns off. | ||
Disconnect the charger from the | 1. Switch on your phone and the | |
headset and the wall outlet. | headset. | |
The fully charged battery has power |
| |
for up to 7 hours of |
|