Jwin JT-P551 SET Local Area Code, Phone Book Entry Without Emergency Number Setting

Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008

OPERATIONAL INSTRUCTIONS

Basic Setup-Continued

7.SET LOCAL AREA CODE

•When the LCD displays “LOCAL AREA CODE”, press [OK/DIAL] to enter this function.

•Press [▲] or [▼] to select the first digit of area code.

•Press [OK/DIAL] to confirm the first digit.

•Use the same procedure to set the rest of the digits.

8.PHONE BOOK ENTRY WITHOUT EMERGENCY NUMBER SETTING

•When the LCD displays “STORE NUMBER”, press [OK/DIAL] to enter.

•Flashing prompt will appear in the middle of the display.

•Use the keypad to enter the desired number.

•Press [OK/DIAL] to confirm.

•A flashing prompt will now appear on the bottom line of the display.

•Use the keypad to enter the name (16 letters max.).

•Press the number key containing the desired letter and press it repeatedly until that letter is displayed on the LCD screen. Press the “1” key once for a space (repeatedly for a symbol). Press “*” and “# ” keys for additional symbols.

•Press the [DEL] button to correct entry.

•Press [OK/DIAL] to confirm followed by the words “EMERGENCY OFF” on the display.

•Press [OK/DIAL] to confirm followed by the word “SAVE” on the display and an audio announcement: “Name recording.”

•If you wish to not record a voice tag, press the [DEL] button or;

•Press and hold [OK/DIAL] until there is a beep.

•To record a Name Tag for the number entered, press and hold [OK/DIAL] during the entire recording process until finished.

•Release [OK/DIAL] to end the recording. There will be an audio signal of “STORE,” and the words “STORE NUMBER” will be shown on the display.

•Press the [DEL] button to exit this setting.

Note: The JT-P551 can store up to 30 records. The words “MEMORY FULL” will appear on the LCD screen when the records are full.

- 13 - www.jWIN.com