Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008
OPERATIONAL INSTRUCTIONS
Calling a Number from the Caller ID List-Continued
4.If the record is 10 digits but the first 3 digits of the record is different from the set area code, press [OK/DIAL] once to show 11 digits with adding ‘1’ as the first digits. Press [OK/DIAL] again to return back to 10 digits. Press [OK/DIAL] once again to show 7 digits and first three digits will be erased. Pick up the phone and the number will be dialed out automatically.
In
1.Press [▲] or [▼] to select the desire caller id record.
2.If the record is less than 10 digits, press [OK/DIAL] once and the displaying number will be dialed out automatically after 2 seconds.
3.If the record is 10 digits and the first 3 digits of the record is the same as set area code, press [OK/DIAL], the three digits area code will be erased and it will display 7 digits number only. Press [OK/DIAL] again to return back to 10 digits with adding area code. Press [OK/DIAL] once again to show 11 digits with adding ‘1’ as the first digits and area code as well. The number will be dialed out after 2 seconds automatically.
4.If the record is 10 digits but the first 3 digits of the record is different from the set area code, press [OK/DIAL] once to show 11 digits with adding ‘1’ as the first digits. Press [OK/DIAL] again to return back to 10 digits. Press [OK/DIAL] once again to show 7 digits and first three digits will be erased. Pick up the phone and the number will be dialed out automatically. (Please refer to the table as below for reference)
Name Recording
1.Press [▲] or [▼] to find the party for which you want to record a voice name (recorded voice will sound for the party when selected from the phone book) and press [OK].
2.To record, press and hold [OK/DIAL] and begin recording after the beep (Hold [OK] while recording). Recorded voice name will automatically play one time.
3.To
4.Press [▲] or [▼] to find the next party for voice recording and repeat from step 1.
- 19 - | www.jWIN.com |